carerhome 
Nowadays, there are so many products of home audio amplifier with crossover in the market and you are wondering to choose a best one.You have searched for home audio amplifier with crossover in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home audio amplifier with crossover which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
Amazon.com
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers
- ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
Amazon.com
- Come with the 24V power adapter that can be carefully matched with this integrated amp physically as well as electrically. Unlike other amps come with a 12V power supply, The power supply is very important for a digital amp if you need clear sound !
- With subwoofer volume control, L and R channels Treble&Bass independent control, subwoofer frequency adjustment control.
- Adopt Texas Instruments TPA3116D2 * 2 chips, small simple compact design but practical and powerful, can drive 2-8ohm, 20-200Watts speakers
TB20A TPA3116D2 Stereo Amplifier 2.1 Channel Class D Audio Amp with Subwoofer Volume Control 2x50W 1x100W Sub Output Super Bass Power Receiver, Treble Bass Independent Adjustment + Power Supply
Amazon.com
- To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
- Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB
- Output Impedance: 4-8 ohm
- Sub volume and crossover control knobs
- LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
Amazon.com
- Splits stereo signals into 3 stereo bands (LOW / MID / HIGH) and a 4th mono band for the subwoofer. For use with 3-way speakers in combination with a subwoofer, the CX-23SW connects directly to the 3 speaker amplifiers and subwoofer via XLR connectors
- Phase inversion switches on the MID and HIGH bands allows driver phase adjustment, and low-cut subsonic filters provide low frequency driver protection
Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!
Nady CX-23SW 3-Way Stereo, Plus Subwoofer Crossover – Fits in a 19" Single Rack Space (1U) – For multi-amplifier setup
Amazon.com
- 100W Subwoofer Amplifier Board
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V)
- built-in TPA3116 amplifier chip
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories
Amazon.com
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
Amazon.com
- S800 Amplifier is the upgraded version of F900. 1, Added Bass function and improved the bluetooth function. 2, Added a "M" button to switch the bluetooth and AUX function easily, long press "M" key to adjust sound in bluetooth mold. 3, Improved the USB sound card function, can play Hifi Music without drivers.
- Bluetooth Receiver & Stereo Amplifier 2 in1 Module: this bluetooth amplifier is 50W*2 dual-channel output, can transmit music from mobile phone to your speakers via bluetooth 4.0, no need wiring. And the bluetooth transmitting range is up to 30 feet.
Quick tips:
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
Parameter:
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
S800 100W Bluetooth Audio Amplifier DC 12 Volt with Power Supply 12V 5A, 50W + 50W Dual Channels HIFI Stereo Bluetooth 4.0 Receiver Bass Amp, Home Car Amplifi Built-in EMI Filter
Amazon.com
- This subwoofer amplifier adopts brand-new TI TPA3116D2 amplifer chip, which can offer 100W powerful output and 90% efficiency.
- Compared with other similar products on the market, it also uses a NE5532 buffer op-amp to achieve more powerful performance.
- Its super mini size can be easily hold by one hand, which will be a good match for your desktop.
- Power supply (not included, search ASIN: B074J81XRB to get one): DC 8-25V; at least 3A; higher voltage and current within the limitation would bring higher power
Product Parameters:
Bluetooth connecting distance: Within 10 meters
Bluetooth standard protocol: Bluetooth 4.0 + EDR
Channel: 2 channel
Output rated power: 50W × 2
Input Interface: Bluetooth, USB sound card, AUX
Operating mode: button
Input voltage: DC9V-24V
Input current: 3A (min.)
Dimensions (Excluding protrusions): 80 × 53 ×22mm (3.15 × 2.09 × 0.87 inches) (W×D×H)
Weight: 105 grams (0.231 pounds)
Warm Tips:
Bass can only work on the Bluetooth mode. Long press for 2 seconds and then long press again for 2 seconds to choose different sound effects.
The sound effect setting will not be saved and you need to set it again when you need to use.
Voltage × Ampere=Watt, e.g. 12V×5A=60W, the min. power of the power supply should be higher than 50W.
If the power is cut off while the module is using, it means the power of the power supply is too small,
please change another power supply with larger power or turn down the volume to use.
Package includes:
1 × Bluetooth amplifier
1 × audio signal cable(1.2m length)
1 × AV audio signal cable(1.5m length
1 × US-type power supply
Nobsound 100W Subwoofer Digital Power Amplifier Audio Mini Amp (Subwoofer, Black)
Parameters:
- Audio input: 3.5mm
- Audio output: Banana plug
- Power supply: DC 8-25V; at least 3A
- Maximum power: 100W
- Chip: TPA3116D2 + NE5532
- Weight: 0.35Kg; 0.2Kg (without package)
- Dimensions: 68.5 * 33 * 90 mm (not including terminals)
Packing List:
- 1 * amplifier
Car Home Amplifier Subwoofer Equalizer Crossover RCA Adjust Line Level Volume
Amazon.com
- This product designed by Nobsound in 2017 is a 2.1-channel digital power amplifier, Cost-Effective and high performance, Mini and compact, High-Power with HiFi good sound and very useful, almost match any speaker on the market, the most perfect 2.1 digital amplifier, you deserve to have.
- 2017 latest version, Treble&Bass independent control, add the subwoofer frequency adjustment, add the pre-amplification
Dimensions: 55 * 50 * 40mm
Color: Black
Conductor Material: Tinned Copper
Number of cores: 8
Jacket Material: PVC
The largest wire diameter: 7.5 (mm)
Two kinds of adjustment method: 1 by the gain adjustment, 2 through frequency adjustment.
Nobsound HiFi TPA3116D2 2.1 Channel Digital Audio Power Amplifier Stereo Amp 2×50W+100W Subwoofer Treble Bass Independent Adjustment
Amazon.com
- BRING IN THE BASS: A highly efficiency subwoofer amplifier that serves up big bass with up to 1000W peak/400W RMS for deep, crisp, clean low frequency sound effects
- WORKS WITH ALL RECEIVERS: Compatible with older and newer source equipment and includes both RCA and speaker level input/outputs for greater flexibility with various home theater audio systems
- ADJUSTABLE CONTROLS: Includes auto on/off sensing as well as phase, crossover and volume controls to dial in just the right amount of bass
Please note:
The power supply is not included. If you want to buy it from us, please search ASIN: B074J81XRB. It should be with small power ripple and the power voltage can be 12-24V. (If in low voltage, the output power will be also in low display, finally the speaker will be in low voice.)
Parameters:
- Power supply: DC 12V-25V (interface 5.5mm/2.1mm)
- Output power: 2×50W+100W Subwoofer
- Channel: 2.1
- Audio input: Stereo L/R RCA
- Audio output: Banana Speaker Jacks
- Size: W100*D157*H35 mm (Not include the protruding part)
- Net weight: 0.52Kg
Package includes:
- 1PC finished amplifier
