carerhome Nowadays, there are so many products of side by side kegerator fermenter in the market and you are wondering to choose a best one.You have searched for side by side kegerator fermenter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings side by side kegerator fermenter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
753 reviews analysed
Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual
Inkbird Thermostat ITC608T Dual Temperature Probe Temperature Controller Pre Wired AC Dual Stage Cooling Heating Outlet 12 Period Timer Stage 120V 15A 1800W 2 Temp Sensors Reptile Incubator Brewing
- Two temperature probes can be insert into P1 and P2 interface. Temperature senor is waterproof.
- US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃). Max Loading: 120V 15A 1800W.
Description:
Maximum Output Load: 120Vac, 60Hz, 15A, 1800W
Temperature Measurement Range: -40~100°C /-40~212°F
Temperature Display Accuracy: 0.1°C /°F (<100°c f)="">
Display Unit: °C /°F (Temperature)
Ambient Temperature: -20~60°C /-4~140°F
Temperature (Storage Environment): 0~60°C / 32~140°F
Humidity (Storage Environment): 20~80%RH (Unfrozen or condensation state)
Temperature Sensor Cable Length: 2m (78.74 in)
Input Power Cable Length: 1.5m (59.05 in)
Unit Dimension: 20.8 cm x 8.5 cm x 3.5 cm (8.19 x 3.35 x 1.38 in)
Warranty: 2 years
Package Included:
1x ITC-608T Temperature Controller
2x Temperature Sensors
1x Manual
AcuRite 00613MB Humidity Monitor with Indoor Thermometer, Digital Hygrometer and Humidity Gauge Indicator
- Indoor thermometer displays temperature in Fahrenheit or Celsius. Indoor Temperature Range: 32 to 122 degrees Fahrenheit
- 0 to 50 degrees Celsius
- Humidity gauge shows the comfort level of your home, based on current humidity level
- Track conditions throughout the day with the high and low records to ensure a healthy home.
- Humidity meter features a magnet-mountable design, fold-out stand and clip
- Powered by (1) AA battery (not included)
- Includes limited 1-year warranty
- Knowledgeable US-based customer service team
The AcuRite 00613 Indoor Humidity Monitor provides all the home comfort information you need, at a glance. Featuring a precision indoor thermometer and hygrometer, and an easy-to-read LCD display, it shows current indoor humidity and temperature, plus daily high and low records. A handy home comfort icon makes it effortless to tell if your indoor humidity is too high, too low, or “OK.” Multiple mounting options include a convenient clip, magnets for attaching to a metal surface like a refrigerator, or you can stand it upright on a tabletop. Limited one-year warranty. It’s more than accurate, it’s AcuRite.
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
Kegco Sankey to Ball Lock Coupler Adapter Set
- Kegco Sankey coupler adapter kit includes both a gas and a liquid post
- These posts replace the barb fittings on your Sanke coupler to match the posts on a typical Cornelius ball lock style keg
- Allows you to seamlessly switch between your ball lock corny keg and a commercial Sanke keg in seconds
- No more messing with tubing connections or continuously tapping and untapping the same sanke keg when switching back and forth
- Now there’s a quick and easy solution that allows you to dispense any beer you have on tap!
Mark II Keg and Carboy Washer
The most time consuming and most important step in making beer or wine at home is cleaning and sanitizing. The mark II keg Washer reduces the time it takes to clean and sanitize your kegs, carboys, and buckets (also comes with hose cleaning adapters). simply fill the reservoir with cleaner or sanitizer, place the vessel over the sprayer, and plug it in. This great automated device frees you to complete other tasks while it works. Save on cleaning and sanitizing chemicals, by spraying the solution on the entire inner surface you use less, saving water and chemicals. The reservoir also contains space to soak small items like airlocks and stoppers. The mark II keg Washer should be the first piece of equipment you set up and the last you put away.
DIGITEN Digital Programmable Thermostat Plug, 2 Stage Outlet Pre-Wired Heating & Cooling Temperature Controller for Fermentation Seed Germination Reptiles and Brewing Breeding Incubation Greenhouse
- ✌【Visualization】Large LCD screen, easy to read and control.
- ✌【Dual mode】Dual relay output, controls both heating and cooling/regrigeration equipment at the same time.
- ✌【Empathetic design】Easy to use and program, Plug and play design.
- ✌【Safety】Over-temperature and sensor fault alarm are available.
- ✌【Wide applications】Widely used for greenhouse, mushroom house, incubation room, cultivation, planted tank, shrimp tank, home brewing, wine cellar, fermentation chamber, aquarium, pet breeding, incubation, reptile, chicken coop, aviary, rabbit hutch, brooder, baby room, nursey, livingroom, bedroom, attic, garage, BBQ, baking, mini ice machine, chest freezer, etc.
1.5"Tri Clamp to homebrew beer conry keg Ball Lock Post SS304 Sanitary Brewer Fitting 50.5mm OD ferrule SS conical fermenter pressure transfer (liquid) 19/32
This allows you to snap on the beer / liquid QD on to a 1.5″ TC port.
The ball lock post is removable from the TC side and it is equipped with a poppit valve like all corny posts.
Attaching this to your fermenter makes transferring to a keg simple and easy
Conclusion
By our suggestions above, we hope that you can found Side By Side Kegerator Fermenter for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Side By Side Kegerator Fermenter, eg:
- What are Top 10 Side By Side Kegerator Fermenter for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Side By Side Kegerator Fermenter to buy?
- What are Top Rated Side By Side Kegerator Fermenter to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Side By Side Kegerator Fermenter?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Side By Side Kegerator Fermenter.
- Before deciding to buy any Side By Side Kegerator Fermenter, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Side By Side Kegerator Fermenter and What you should consider when buying the Side By Side Kegerator Fermenter and Where to Buy or Purchase the Side By Side Kegerator Fermenter. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Side By Side Kegerator Fermenter of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Side By Side Kegerator Fermenter.
