Pyle Model : PTA44BT

Bluetooth Home Audio Source Amplifier

Bluetooth Home Audio Amplifier, 4-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (500 Watt)

Features:

Bluetooth Connectivity:

What’s in the Box:

Technical Specs:

Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!

Power Amplifier – 4000 Watts – Model Number: MBG-4000, Power Handling 2 x 500 Watts @ 8 Ohms, 2 x 1000 Watts @ 4 Ohms, Momentary Peak Output 4000 Watts @ 4 Ohm Bridge. , Technical Specs Input level: 0 dB, Input Resistance: 20K ohm, Rising Speed: 45 v/us (BTL-MONO 90v/us), Distortion for adjustment: 95 dB, Frequency Response: 20Hz-20K Hz, General Harmonic Wave Distortion: 20Hz-20K Hz . , Front of Amplifier Channel A and B volume controls, Clip maximum level indicator, Signal indicator, Power indicator, Power red when started. Rear of Amplifier Channel A and B signal input (XLR & 1/4″ jack connectors), Channel A and B power output (Speakon & binding post connectors), Stereo/Bridge Mono switch, Lift/Ground switch, Fuse: 10A, AC input: 110V, 50-60 Hz, Dual cooling fan. Dimensions: 2 Space / Fits Standard 19″ rack cases, Weight: 18.5 lbs., Brand New, One Year Warranty. Our MBG amplifiers are a step up from our LE series.  We have still tried to keep your budget in mind without compromising quality.  These MBG amps pack a lot of juice in a cost effective amplifier.  These amps are easily capable of pushing two 18″ subwoofer cabinets or a pair of dual 15″ speakers.

Product Description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last.

Features:

From the Manufacturer

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Back View
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.

Switchable Mixing (Karaoke) Mode

When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

USB 2.0 Input Interface with LED Indicator

You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.

.14-Inch AUX-In Jack

The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

.25-Inch Phone Jack

Accepts headphones with .25-inch plugs.

.25-Inch Microphone Input Jack

Accepts microphones with .25-inch plugs.

REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 120 Watt RMS at four Ohms
• Blue LED Output Level Display
• Frequency Response: 20 Hz-20 kHz
• Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
• Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
• Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inches

Quick tips:

1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.

Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.

Parameter:

1. Power supply range: 12v-24v;

2. THD: ≤ 0.04%;

3. Frequency Range: 20Hz – 120Hz (±1 dB);

4. SNR: ≥ 98dB;

5. Input sensitivity: ≤ 280mV;

6. Terminating impedance: 2Ohm – 8Ohm;

7. Output power: 100W for Subwoofer;

8. Input mode: 3.5mm audio input;

9. Power supply: 19V 4.74A 90W;

10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.

Product Description

Pyle Model : PFA300

90 Watt Class-T Hi-Fi Stereo Amplifier

90 Watt Class-T Hi-Fi Stereo Amplifier with AC Adapter Included

The PFA300 is a class-T digital amplifier with up to 90 watts of power. Use it in your car, your boat, your RV, your golf cart, your home — anywhere you need a great amplifier with low distortion and acoustically accurate reproduction of music. Adjust the bass and treble to your liking, or bypass the included EQ. Takes 3.5mm stereo jack input or stereo RCA. 2-8 ohm speaker impedance compatible. Includes a 12 V DC adaptor.

From the Manufacturer

90 Watt Hi-Fi Audio Amplifier
(Click here for a larger image)

(Click here for a larger image)

12V AC/DC Adapter Included
(Click here for a larger image)

Control Face with Illuminated Volume Knob
(Click here for a larger image)

Compact Power
(Click here for a larger image)

Add Versatility to Your Entertainment System
(Click here for a larger image)

Compact Amplified Power

This multipurpose digital Hi-Fi audio amplifier packs a punch. It can be used in your car or home and don’t be fooled by the size, it’ll give your entertainment system a serious boost. The state of the art design uses surface mount components and advanced engineering for proven performance, reduced signal interference, and long operational life. This unit will ensure low distortion and acoustically accurate reproduction of audio. The PFA300, 90-watt class-T circuit designed amp will turn it up to the next level.

Plug it In

Connect your iPod/MP3 player to the 3.5mm input jack! This unit also has a microphone and audio input jacks. (iPod & mic not included)

Party Machine

Create a karaoke session and let the fun begin. Use the mic and aux inputs to add life to the party. You will be in control of the music and then you can configure the audio just the way you want it to sound.

Customize Your Audio Experience

Tone/direct switching allows for customized listening via separate bass and treble adjustments – or the original can be passed through without enhancement.

Built-In Safety Features

Short cut, overload, and overheat protection keeps this amp, as well as other connected devices, functioning properly and safe. The built-in loudspeaker protection circuit triggers when the amplifier is turned on to protect your speakers from high volume bursts of audio. Overload protection shuts down the amplifier if input voltage exceeds 14.4 volts.

Never Leave Home Without It

This Hi-Fi amp can be used in car, bus and boat microphone systems. The compact size will allow you to install it right under your seat or any other small compartments.

Extra Features

• 12V AC/DC Adapter
• Class-T Circuit Design
• Microphone Input Jack
• Speaker Impedance: 2-8O
• 3.5mm iPod/MP3 Input Jack
• Signal to Noise Ratio: >80dB
• Total Output Power: 90 Watt
• Input Power: DC 9 ~ 14.4V 2A
• Total Harmonic Distortion: <0.4%>
• Frequency Response: 20Hz-20kHz
• Short Cut, Overload & Overheat Protection

Explore More Stereo Amplifiers from Pyle:

	PFA100	PFA200	PFA300 Currently Viewing	PFA400U
Total Watt Power	30	60	90	100
Home/Car Use	&#10004	&#10004	&#10004	&#10004
iPod/MP3 Jack	&#10004	&#10004	&#10004	RCA Inputs
Microphone Jack	&#10004	&#10004	&#10004	&#10004
USB & SD Memory Slots				&#10004

Parameters:

• Audio input: 3.5mm
• Audio output: Banana plug
• Power supply: DC 8-25V; at least 3A
• Maximum power: 100W
• Chip: TPA3116D2 + NE5532
• Weight: 0.35Kg; 0.2Kg (without package)
• Dimensions: 68.5 * 33 * 90 mm (not including terminals)

Packing List:

• 1 * amplifier