carerhome 
Nowadays, there are so many products of home audio mono amplifier in the market and you are wondering to choose a best one.You have searched for home audio mono amplifier in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home audio mono amplifier which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
Amazon.com
- POWER YOUR SOUND SYSTEM: 2 Channels rated at 50 watts into 8 ohms. 60 watts RMS per channel at 4 ohms. Bridge Output: 150 Watts at 8 ohms.
- HIGHLIGHTS: 5-Way Binding Posts. A/B Speaker selector. Auto Signal Sensing Power On. Dual Auto-Switching Inputs. Independent level and balance controls. Rear mounted treble and bass controls. Front panel diagnostic LEDS.
- AUTOMATICALLY KNOWS WHEN TO TURN ON: This amplifier is audio sensing, meaning it automatically turns on when you start your system.
AudioSource Analog Amplifier, Stereo Power A Amplifier AMP100VS for Home Sound Systems
Amazon.com
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Experience the vibrancy of our home sound system. A great sound system relies on a great amplifier–they’re an integral element to a full soundscape. Create a multi-room audio environment, build a home theater, or expand your system to the outdoors. Our gold standard Class A amplifiers will fit your every need. This Power (A) AMP100VS system has 2 channels rated at a power output of 50 watts into 8 ohms. It has a power output of 60 watts RMS per channel into 4 ohms. 150 watts are bridged to an output at 8 omhs. Born out of Portland, Oregon, AudioSource began designing and manufacturing high-grade, affordable, and great sounding audio products in 1978. Our goal is to exceed your expectations for value and performance. Specifications: Input Sensitivity: Variable, .7 Vrms for rated power at 8 ohms. Frequence response: 10Hz to 30kHz. Channel Crosstalk: 70 dB. Less than 0.2% THD into 8 ohms at rated power. S/N Ratio: 100 dB A-weighted.
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
Amazon.com
- 【Hi-Fi Amp with Clean Sound Quality】M03 subwoofer amp adopt with the Instruments TPA3255D2 chip, can provide 300watt output power for 4-8ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Subwoofer Amplifier 300 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass Switchable Amplifier One Channel Home Theater Single Power Subwoofer Amp Fosi Audio M03
Amazon.com
- Full frequency mono channel amplifier with 100W powerful output can drive one single speaker
- Added NE5532 buffer OP-AMP to increase more dynamics than other similar products
- Sound is very clean with balanced tri-frequency and no background noise
- Super mini size suits very well for home, office and desktop use
- 3.5mm input and Banana plug (one channel) output
- With our customized high-quality power supply
Nobsound 100W Full Frequency Mono Channel Digital Power Amplifier Audio Mini Amp Home Speaker with Power Supply (Black)
Amazon.com
- 2x75 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your home theater acoustic surround sound system. Gives you 2x75 watts peak power which can be used for subwoofer speakers w/ 4-8 ohms impedance, enjoy high quality music and movie
- MULTIPLE SOURCES: This small personal portable digital amp box lets you connect external audio sources such as tuner, CD DVD player, tape deck, camcorder, VCR to the 3.5mm RCA (L/R) LINE input and enjoy enhanced amplified acoustic audio reproduction
Home Audio Power Amplifier System – 2X75W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED – For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA – Pyle PCA3
Amazon.com
- Built-in low pass filter, 220W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
- Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use
- Adopt Texas Instruments TDA7498E chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound
Product Description
The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device–you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA3 runs on 110V or 220V with a voltage selector switch.
From the Manufacturer
Click here for a larger image
Click here for a larger image
Click here for a larger image
Click here for a larger image
The Ultimate Stereo Power Amplifier
This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.
110/220 Voltage Selector
This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
Compatibility
Compatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.
RCA L/R Line Input
Lets you connect the desired line input source.
Take Control
Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.
Push Type Speaker Terminals
Lets you easily connect speaker wires directly to the amplifier.
Replaceable Power Fuse
The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse –not included)
Additional Features
- Harmonic Distortion: 0.3%
- 2 x 75 Watt RMS at 4 Ohm
- Blue LED Output Level Display
- Frequency Response: 20 Hz-40 kHz
- Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
- Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
- Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
- Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)
Subwoofer Amplifier TDA7498E Mini Sub Bass Amp Digital Class D Integrated Subwoofer Amplifier 220Watt x 1 Fosi Audio TP-02
Amazon.com
- Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads | Bridgeable output provides 120 watts into a single 8-ohm load
- 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire | 12-volt trigger input for power-on/off | 12-volt trigger output for controlling other devices
- Buffered loop output of original signal for connecting additional amplifiers
Monoprice Unity 100-Watt Bridgeable Power Amp
Amazon.com
- Virtually noise-free fan operation for near field applications
- Sleek modern design looks good in any audio system
- High current, discrete output transistors that run cool and quiet
- Adjustable 50-150 Hz low pass crossover gives you the room control you need
- Gold-plated 5-way binding posts that accept up to 8 AWG wire
Unity 100-Watt Bridgeable Power Amp
Multiroom audio systems are in high demand these days. Homeowners and businesses have their own idea of what they want. Sometimes the all-in-one does not meet the need of the client.
This 2-channel class D power amplifier features a stereo speaker output, with support for 4-ohm and 8-ohm speakers. It can deliver 50 watts per channel into 8-ohm loads or 65 watts per channel into 4-ohm loads. Additionally, the output can be bridged to provide 120 watts to a single 8-ohm speaker. It includes a buffered loop line output of the original signal for driving another power amplifier in distributed whole house audio systems. The amp can be configured for always on, signal detection, or triggered power on status. It also includes a 12-volt trigger output for controlling other devices.
Features:
• Class-D amplifier providing 50 watts/channel (RMS) into 8 ohm loads or 65 watts/channel into 4-ohm loads
• Bridgeable output provides 120 watts into a single 8-ohm load
• 4-pole detachable speaker screw connector (Phoenix connector) with support for up to 12 AWG speaker wire
• 12-volt trigger input for power-on/off
• 12-volt trigger output for controlling other devices
• Buffered loop output of original signal for connecting additional amplifiers
• Rear panel volume gain adjustment
• Built-in thermal and short circuit protection circuits
• Includes rack-mount ears for mounting a single amp or two amps side-by-side
Dayton Audio APA150 150-Watts Power Amplifier (Black)
Dayton Audio’s versatile APA150 power amplifier delivers 75 watts per channel in its full-range stereo configuration, or 150 watts into 8 ohms when in bridge-mono mode. A built-in, switchable low-pass filter also makes the APA150 a great subwoofer amp!
Seismic Audio – MBG-4000 – Power Amplifier – 2 x 500 Watts at 8 Ohms – 2 x 1000 Watts at 4 ohms – Amp
Amazon.com
- The SMP500 is designed for use with higher wattage passive subwoofers that require external power with up to 1000 watts power peak / 400 watts RMS with 4 ohms. It has highly efficient Class D technology to run cool under demanding loads.
- SOUND QUALITY: Get a deep, crisp, clean low-frequency sound effect in dedicated home theater systems and media rooms to improve the overall sound quality of surround sound systems with dual 100/220 voltage.
Power Amplifier – 4000 Watts – Model Number: MBG-4000, Power Handling 2 x 500 Watts @ 8 Ohms, 2 x 1000 Watts @ 4 Ohms, Momentary Peak Output 4000 Watts @ 4 Ohm Bridge. , Technical Specs Input level: 0 dB, Input Resistance: 20K ohm, Rising Speed: 45 v/us (BTL-MONO 90v/us), Distortion for adjustment: 95 dB, Frequency Response: 20Hz-20K Hz, General Harmonic Wave Distortion: 20Hz-20K Hz . , Front of Amplifier Channel A and B volume controls, Clip maximum level indicator, Signal indicator, Power indicator, Power red when started. Rear of Amplifier Channel A and B signal input (XLR & 1/4″ jack connectors), Channel A and B power output (Speakon & binding post connectors), Stereo/Bridge Mono switch, Lift/Ground switch, Fuse: 10A, AC input: 110V, 50-60 Hz, Dual cooling fan. Dimensions: 2 Space / Fits Standard 19″ rack cases, Weight: 18.5 lbs., Brand New, One Year Warranty. Our MBG amplifiers are a step up from our LE series. We have still tried to keep your budget in mind without compromising quality. These MBG amps pack a lot of juice in a cost effective amplifier. These amps are easily capable of pushing two 18″ subwoofer cabinets or a pair of dual 15″ speakers.
OSD Audio 1000W Mono-Channel Class D Subwoofer Amplifier – Onboard DSP, 4-8 Ohm – SMP500
Amazon.com
- 750 WATT POWER: The Pyle 6-Channel Bluetooth Home Audio Amplifier is perfect for your PA and home theater entertainment. It gives you 750W peak power which can be used for multi speakers w/ 4-8 ohms impedance allowing you to enjoy high quality audio
- BLUETOOTH CONNECTIVITY: The professional integrated indoor stereo receiver is equipped with Bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing
Upgraded 2018 Wireless Bluetooth Karaoke -6 Channel 750 Watt Home Audio Sound Power Stereo Receiver Amplifier w/ USB, Headphone, 2 Microphone Input w/ Echo, Talkover for PA- Pyle PTA62BT
Pyle Model : PTA62BT
Bluetooth Home Audio Source Amplifier
Bluetooth Home Audio Amplifier, 6-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (750 Watt)
Features:
Bluetooth Connectivity:
What’s in the Box:
Technical Specs:
This 750-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won’t find this amplifier lacking. It features a built-in FM radio with digital LCD display. It’s equipped with RCA inputs on the back and two ¼” mic jacks on the front, so you can turn this amp into a karaoke machine – even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. Remote is already included. Runs on 110 and 220 V AC.
