Top 10 Tool Case For Dewalt Right Angle Grinder

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The DEWALT DWE4517 7-inch 8,500 rpm 4HP Angle Grinder has a high power 4 HP (maximum motor HP) 8,500 rpm motor with overload protection that provides higher operating speeds under load. The epoxy coated field and armature provides long service life against abrasion from airborne debris. A low profile gear case allows for work in tight areas. The automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage, and the 2 position side handle provides improved ergonomics for specific applications. 8,500 rpm provides optimal material removal with 9″ grinding wheels. Also a brush window that allows for quick brush replacement. Includes a 7″ guard and a 2-position side handle.

Product Description

The product is 18V CRDLS Cut Off Tool

Amazon.com

The tough, no-nonsense DEWALT DC411B 18-volt, 4-1/2-inch cordless cut-off tool is designed to meet the challenges of everything from rusted rebar and steel I-beams to resilient threaded rod and corroded angle iron. Its 6,500-RPM motor and 4-1/2-inch-diameter cutting wheel are perfectly engineered to cut and grind metal. It’s powered by DEWALT’s 18-volt cordless batteries (not included).

The versatile DEWALT DC411B cut-off tool
(view larger).

Power and Performance

Powered by a 6,500 RPM motor, the DC411B’s abrasive 4-1/2-inch-diameter wheel will slice through most metals quickly and cleanly. Besides the cutting and grinding wheel, the versatile DC411B will also accept a Zirconia-grit flap disk, stringer wire wheel, and rubber-backed sanding disc, allowing you to clean, smooth, shape and finish a wide variety of materials, including steel, wood and masonry.

Comfort and Convenience

The DC411B has a low-profile, jam-pot housing that ensures precise gear alignment for a smoother, quieter transmission while allowing access to tight, narrow spaces. A quick-change wheel release provides easier and quicker wheel removal without the need for a wrench, and since there’s no cord to drag around, you can work un-tethered anywhere at any height or angle. Other commercial-grade features include a two-position side handle and a large trigger switch with lock-off button.

Bare Tool

This DEWALT cordless tool does not come with a battery or charger. It’s compatible with the DC9096 18-volt XRP battery pack and DW9117 15-minute charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It’s also covered by DEWALT’s one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use–for free.

What’s in the Box

One DEWALT DC411B 18-volt 4-1/2-inch cordless cut-off tool, one Type 1 cutting wheel and safety guard, one wrench, two matched flanges, and one two-position side handle (batteries and charger sold separately).

See all Product description

DEWALT DWE4519 9-inch 6,500 rpm 4HP Angle Grinder has a high power 4 HP (maximum motor HP) 6,500 rpm motor with overload protection that provides higher operating speeds under load. The epoxy coated field and armature provides long service life against abrasion from airborne debris. A low profile gear case allows for work in tight areas. The automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage, and the 2 position side handle provides improved ergonomics for specific applications. 6,500 rpm provides optimal material removal with 9″ grinding wheels. Also a brush window that allows for quick brush replacement. Includes a 9″ guard and a 2-position side handle.

The DEWALT DWE402K 4-1/2″ 11amp Angle Grinder Paddle Kit features an 11 Amp AC/DC 11,000 RPM motor that is designed for faster material removal and higher overload protection. A Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. It has a low profile gear case which allows access into tight spaces, and a Quick-Change wheel release which allows tool free wheel removal without the need for a wrench. This grinder also has a One-Touch Guard that offers 360 degree rotation of the guard in a single action. A paddle switch with safety lock-off prevents accidental start up, and the matching wheel flanges allow the use of common accessories. Includes: Grinder, One-Touch Guard, 2-Position Side Handle, Wrench, Kit Box.

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

The DEWALT DWE402W 4-1/2″ Small Angle Grinder with Wheel features an 11 Amp AC/DC 11,000 RPM motor which is designed for faster material removal and higher overload protection. The Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. It has a low profile gear case allows access into tight spaces, along with a Quick-Change wheel release that allows tool free wheel removal without the need for a wrench. A One-Touch Guard allows for 360 degree rotation of the guard with a single action, and a paddle switch with safety lock-off prevents accidental start up. The matching wheel flanges allow the use of common accessories. Includes: (1) Grinder, One-Touch Guard, 2-Position Side Handle, Wrench, 4-1/2″ Abrasive Wheel.

The DEWALT DW840K 7-Inch Angle Grinder with Bag and Wheels. This grinder features a 13.0 Amp AC/DC, 8,000 rpm motor which provides high power and speed for 7″ grinding applications. It has a high power-to-weight ratio for greater efficiency and reduced user fatigue. The adjustable guard can be adjusted to redirect sparks away from user. Rear handle design for greater comfort and control, and external brush caps for easy servicing. The sealed ball and roller bearings allow for extended motor life. A spindle lock button allows for single-wrench bit changes. Includes (5) Grinding Wheels, Wrench, Backing Flange, Adjustable Guard, 2-Position Side Handle, Carrying bag.

The DEWALT DWE4214 4-1/2″ 11amp Angle Grinder Slide features an 11 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protection. It has a dust ejection system which provides durability by ejecting dust and debris particles that enter the tool through the air intake vents. A low profile gear case allows access into tight spaces, and a quick-change wheel release allows tool free wheel removal. This grinder has a One-Touch guard that allows 360 degree rotation of the guard with a single action, along with a Lock-On slide switch provides increased user comfort in extended use applications. Matching wheel flanges allow the use of most common accessories.

The DEWALT DWE4120 4 1/2″ Paddle Switch Small Angle Grinder has a 9-Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The high efficiency motor provides low operating temps. A featured One-Touch Guard allows for 360 degree rotation of the guard with a single action. The slim, ergonomic body design provides increased comfort in extended use applications and the low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces. This unit also features a Quick-Change Wheel Release which allows tool free wheel removal without need for a wrench. It has a 2-position removable side handle that provides increased comfort and control. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Applications include: Grinding and cleaning up welds, weld and steel surface preparation, sanding metal for various metal fabrication projects. Includes the One-Touch Guard and Hex Wrench.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Tool Case For Dewalt Right Angle Grinder, eg:

• What are Top 10 Tool Case For Dewalt Right Angle Grinder for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Tool Case For Dewalt Right Angle Grinder to buy?
• What are Top Rated Tool Case For Dewalt Right Angle Grinder to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Tool Case For Dewalt Right Angle Grinder?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Tool Case For Dewalt Right Angle Grinder.
• Before deciding to buy any Tool Case For Dewalt Right Angle Grinder, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Tool Case For Dewalt Right Angle Grinder and What you should consider when buying the Tool Case For Dewalt Right Angle Grinder and Where to Buy or Purchase the Tool Case For Dewalt Right Angle Grinder. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Tool Case For Dewalt Right Angle Grinder of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Tool Case For Dewalt Right Angle Grinder.