carerhome We spent many hours on research to finding genesis e330 flavorizer bars, reading product features, product specifications for this guide. For those of you who wish to the best genesis e330 flavorizer bars, you should not miss this article. genesis e330 flavorizer bars coming in a variety of types but also different price range. The following is the top 10 genesis e330 flavorizer bars by our suggestions
549 reviews analysed
Weber 7621 Gas Grill Porcelain Enameled Flavorizer Bar Set for 300 Series Gas Grills (17.6 x 2.3 x 2.2)
Upgrade or replace the Flavorizer bars in your grill with the Weber porcelain-enameled Flavorizer bars. Our unique, angled Flavorizer bars smoke and sizzle when cooking juices drip down, adding flavor to your meal. Use with gas grills to diffuse heat evenly throughout.
Utheer 7621 Grill Parts Flavorizer Bars 17.5 Inches for Weber Genesis 300 310 Series, E-310 E-320 E-330 S-310 S-320 S-330 (with Front Controls), Replaces Weber 7621 7620 Heat Plates
- NOTE ► Fits for Weber Genesis 300 series (with Front-Mounted control panel): Weber Genesis E-310, Genesis E-320, Genesis E-330
- Genesis S-310, Genesis S-320, Genesis S-330
- Genesis EP/CEP-310, Genesis EP/CEP-320, Genesis EP/CEP-330 gas grills. ► Replaces Weber 7620 & 7621. ► DO NOT fit Genesis II Series
- MATERIAL ► Snow Porcelain-Enameled Steel, more thicker and heavier than others. DIMENSIONS ► 17.5″ L x 2.25″ W x 2.375″ H (17-5/8 inches length, 2-1/4 inches width, 2-3/8 inch height), set of 5 pack.
- SUPERIOR QUALITY ► Made of very unique and beautiful material ── Snow Porcelain-Enameled Steel to ensure long-lasting use, which can distribute heat evenly across entire surface. Compare with the original parts, the material of our heat shields are more heavy duty, last longer, full of beauty, very good at spreading the heat and protecting the burners. They can make food more flavorful.
- EASY TO CLEAN ► Wipe off excess oil and food residue with a paper towel or cloth. Then preheat the grill about 15 minutes, using a grill brush with soap and water to clean. Always dry the heat plate completely with a towel to evaporate any remianing mositure before stored.
- HEALTH AND SAFETY ► Our flavorizer bars made of Snow Porcelain-Enameled Steel, with strong oxidation resistance, corrosion resistance and heat resistance. At the same time, they are harmless to human body and can be safely used.
SOLIDLY MADE, QUALITY MATERIAL, DURABILITY LONG.
Our flavorizer bar is made of very unique and beautiful material ── Snow Porcelain-Enameled Steel to ensure long-lasting use. It can fit your grill perfectly and hold the heat beautifully, transfer heat efficiently. They can sit perfectly provideing more even heat than your grill ever did. Thick strong gauge metal allow the heat to disperse equally and will not erode to rust in a matter of several months even you grill regularly. They can be used for a long time, so you don’t have to replace them often, which saves you a lot of money and time. Also can make your gas grill usable for longer, cook better, get healthier meals in minutes.
Tailor Made and Perctly Fit
► Fits for Weber Genesis 300 series (with Front-Mounted control panel): Weber Genesis E-310, Genesis E-320, Genesis E-330; Genesis S-310, Genesis S-320, Genesis S-330; Genesis EP/CEP-310, Genesis EP/CEP-320, Genesis EP/CEP-330 gas grills.
► Replaces Weber 7620 & 7621.
► Dimensions: 17.5″ L x 2.25″ W x 2.375″ H (17-5/8 inches length, 2-1/4 inches width, 2-3/8 inch height).
► Package Included: 5* Flavor Bars.
► Sturdy Packaging: Our packing is strong enough to allow you to receive the product in perfect condition.
Attention
Before ordering, please measure your current one to ensure these are the correct units for your grill. Make sure the specific brand, model and the year of production.
Quality Customer Service
We are as customer oriented. Providing quality product supported by great customer service. Please feel free to contact us if you have any thought or problem, we are always here to help you.
SHINESTAR 7620-17.5" Flavorizer Bar Replacement for Weber Genesis E-310 S-310 E-320 S-320 E-330 S-330 EP-310 with Front Control Knobs, 17 5/8 inch Stainless Steel Flavor Bar 7621 (Set of 5, SS-WB004)
- Replacement for Weber Genesis E/S-310, E/S-320, E/S-330, EP/CEP-310, EP/CEP-320, EP/CEP-330 Series With Front-Mounted Control Panel, model year are 2011-2016. Replacement for Weber 7620 – 17-5/8″ Stainless Steel Flavorizer Bar Set or 62783/7621 – 17-5/8″ Porcelain Coated Flavorizer Bar Set
- Dimensions: 17-5/8 inch long, 2-1/4 inch wide, 2-3/8 inch high. (Or: 17.5″ L x 2.25″ W x 2.375″ H) Package including set of 5 flavor bars
- Made of heavy duty food grade stainless steel, each bar’s thickness up to 17 GA. Built to long lasting, easy to care for
- The flavor bars are designed pefectly to catch drippings that smoke and sizzle, adding that irresistible smoky flavor and love to your food. Any drippings not vaporized follow the slope and are funneled away from the burners, so to protect burners
- If your grill model is Genesis 300 Series but feature with Side Mounted Control Panel, please refer to SHINESTAR 7540 – 24.5″ Stainless Steel Flavorizer Bars Replacement for Weber Genesis 300 Series With Side Control (SS-WB003)
Replacement for Weber Models:
– Genesis E/S-310, E/S-320, E/S-330, EP/CEP-310, EP/CEP-320, EP/CEP-330 Series With Front-Mounted Control Panel (2011-2016)
– Replacement for Weber part numbers: 7620/7621/62783
Features:
– Dimension: 17-5/8 inch long, 2-1/4 inch wide, 2-3/8 inch high. (Or: 17.5″ L x 2.25″ W x 2.375″ H)
– Material: 430 Stainless Steel. 400 series stainless steel is superior to 300 series stainless steel when subject to high heats, can withstand the heat needed to grill at any temperature
– Package: Set of 5 flavor bars
– Part number: SS-WB004
Notes:
– Not original Weber part, replace for Weber 7620 – 17-5/8″ Stainless Steel Flavorizer Bar Set or 62783/7621 – 17-5/8″ Porcelain Coated Flavorizer Bar Set
– Ade of cast aluminum, these flavor bars are durable, efficient, require minimal care and maintenance
– The thickness of stainless steel bars are heavier than non-stainless ones. Will last longer than non-stainless ones
– Be sure to check the length of your bars as there are different lengths on the market.
If you need to replace Heat Deflectors, please refer to SHINESTAR 7622 Stainless Steel Heat Deflector Replacement for Weber Genesis 300 Series
If you need to replace the burner tubes, please refer to SHINESTAR 62752 Burner Tube Set Replacement for Weber (3 Burners) Genesis 300 Series
If your grill model is Genesis 300 Series but feature with Side Mounted Control Panel, please refer to SHINESTAR 7540 – 24.5″ Stainless Steel Flavorizer Bars Replacement for Weber Genesis 300 Series With Side Control (SS-WB003)
PETKAO 66033 Porcelain Enameled Flavorizer Bars for Genesis II SE-410, Genesis II LX SE-410, 17 x 2-3/8 x 2-1/8in, 7PCS
- Set of 7 porcelain steel flavorizer bars for Genesis II E-410 grills
- Each measures 17”L x 2-3/8”W x 2-1/8”H.
- Replaces original part number: Weber # 66033
- The flavorizer bars are easy to install
- Please double-check the length of your existing bars before ordering!
- These heat deflectors reside above the burners, preventing flare-ups and converting food droplets into savory vapors that envelop the firebox. Any drippings not vaporized follow the slope and are funneled away from the burners, so to protect burners.
- Easy to clean : Smooth surface, non-stick oil and easy to clean, just wash with soapy water
- Sturdy gift packaging: Ensure no damage in transmit and a nice gift for others.
- PETKAO will always stand behind each product we manufactured.
PETKAO Porcelain Steel Flavorizer Bars for Genesis II E-410 grills
Notes:
- Replaces original part number: Weber # 66033.
- These flavorizer bars fit Genesis II E-410 grills.
- Please measure your existing flavorizer bars before purchasing, try to contact us for detail information if you are not sure.
Specification:
- The package includes : 7 heat plates in per package.
- Dimension : Each measures 17”L x 2-3/8”W x 2-1/8”H , thickness : 18Ga.
- Material：Porcelain steel.
GasSaf 17.5 inch flavorizer bar and Heat Deflector Replacement for Weber 7620 7622, Genesis 300 Series E310 E320 E330 EP310 EP320 EP330 with Front Control Knob(2011&Newer)
- Grill parts kit includes 5 packs 304 stainless steel flavorizer bars and 2 packs stainless steel heat deflector. Flavorizer bars dimensions: 17.5 inches long, 2.25 inches wide, 2.375 inches hide. Heat deflector dimensions: 13 1/4 inches long, 8 3/4 inches wide
- Parts kit fits Weber Genesis 300 series gas grills (Front-mounted control panel). Parts kit replace for Weber 7620 & Weber 7622
- Parts kit fits Weber Genesis E-310 (2011-2016), Genesis E-320 (2011-2016), Genesis E-330, Genesis EP-310(2011-2016), Genesis EP-320 (2011-2016), Genesis EP-330 (2011-2016), Genesis S-330
- Sold heat shield plates and heat deflector in a set, one-stop shopping, get what you need in a decent price to renew your grill
- Not compatible with Genesis II or Genesis II LX 300 series grills. Aftermarket replacements, please double-check the model of your bars before you order
Specifications:
★ Grill parts kit includes 5 packs stainless steel flavorizer bars and 2 packs stainless steel heat deflector. Durable and even in heat
★ Sold heat shield plates and heat deflector in a set, one-stop shopping, get what you need in a decent price to renew your grill
★ Flavor bar dimensions:17.5 inches long, 2.25 inches wide, 2.375 inches hide. Heat deflector dimensions:13 1/4 inches long, 8 3/4 inches wide.
Replacement part for:
★ Weber Genesis 300 series gas grills (Front-mounted control panel). Parts kit replace for Weber 7620 & Weber 7622
★ Weber Genesis E-310 (2011-2016), Genesis E-320 (2011-2016), Genesis E-330, Genesis EP-310(2011-2016), Genesis EP-320 (2011-2016), Genesis EP-330 (2011-2016), Genesis S-330.
Note:
Not compatible with Genesis II or Genesis II LX 300 series grills. Aftermarket replacements, please double-check the model of your bars before you order
Grisun 7620 17.5inch Flavorizer Bars for Weber Genesis 300 Series, SUS-304 Stainless Steel Heat Plates Deflectors for Genesis E310 E320 E330 S310 S320 S330 with Front Control Knobs Gas Grill, 7621
- Flavorizer Bars Perfect replacement for Weber Weber Genesis E310, E320, E330, S310, S320, S330 Series With Front-Mounted Control Panel. DON’T fit for models with side control panel
- ????【Perfect Fits】- Weber 56514, 6511001, 6511301, 6519009, 6519399, 6522301, 6531001, 6532001, 6532301, 6550001, 6570001, 6631001, 6631301, 6670001 6631301, 6670001
- ????【Dimensions】- 17.5 (L) x 2.25 (W) x 2.375 (H) inches. 【Package】- Including 5 Stainless Steel Flavor Bars
- ????【Not Easy Rusting and Warping】- 16GA Food Grade 304 Stainless Steel. Non- Magnetic. Strong corrosion resistant, heat resistance and heat preservation give us a healthy and safety barbecue experience. Do not chips, warp or rust out like other material.
- ????【Evenly Spread Heat】- Puts out consistent, evenly spread heat. Allows grill temperature to be properly maintained. Stainless steel bars create delicious, barbecue flavor. Works by vaporizing juices and fats to create smoke. ????【Special offers】- Buy Any 2 get 10% Each!! Buy Other Compatible Parts in Special offers and product promotions will get 10% Discount each Product, Total of 20% Discount!
X Home 7621(17.5 inch) Replacement Flavorizer Bars for Weber Genesis 300 Series E310/E320/S310/S320/S330 EP310/EP320 with Front Control Knobs, Set of 5 Porcelain Steel 7620 Flavor Bars 17.5"
- Replacement Flavorizer bars for Weber Genesis 300 series gas grills (UP-Front mounted control panel).
- Replacement Flavorizer bars for Weber Genesis E-310 2011-2013, Genesis E-320 2011-2013, Genesis E-330, Genesis EP-310, Genesis EP-320 2011-2013, Genesis S-330 grills.
- Replacement Flavorizer bars for Weber 56514, 6511001, 6511301, 6519009, 6519399, 6522301, 6531001, 6532001, 6532301, 6550001, 6570001, 6631001, 6631301, 6670001.
- Dimension: 17.5″Lx 2.25″W x 2.375″H(17-5/8 inch long, 2-1/4 inch wide, 2-3/8 inch high) , Materials: durable porcelain steel
- Note: aftermarket replacements, not Weber original parts. Note: there are two versions, one have holes on each side, the other only have one hole. There are the same items of the same quality.
Dimensions: 17.5″Lx 2.25″W x 2.375″H (17-5/8 inch long, 2-1/4 inch wide, 2-3/8 inch high)
Replacement part for Weber “UP FRONT Mounted Control Panel” Grill Models:
★ Genesis E-310(2011-2013), Genesis E-320 (2011-2013), Genesis E-330 (2011-2013), Genesis EP-310 (2011-2013), Genesis EP-320 (2011-2013), Genesis EP-330 (2011-2013), Genesis S-330
★ 56514, 6511001, 6511301, 6519009, 6519399, 6522301, 6531001, 6532001, 6532301, 6550001, 6570001, 6631001, 6631301, 6670001
★ Materials: durable porcelain steel, distributes heat more evenly than other materials
★Package: 5 packs
NOTE:
★Not compatible with Genesis II or Genesis II LX 300 series grills
★Aftermarket replacements, not Weber original parts, please check the dimension and model of your original parts before you order.
You might randomly receive the flavorizer bar with a tiny hole or with 2 holes, which are the same items, made of same material and of same quality
Weber 7539 Porcelain-Enameled Flavorizer Bars (24.5 x 2.25 x 2.375)
- Material porcelain-enameled Steel
- 5 included. Out of carton Dimensions: 2.3H x 2.2W x 24.5D(inches)
- Catch drippings that smoke and sizzle, adding a smoky flavor to food
- Fits Brand/Models : Genesis E and S series grills(does not fit front-mounted control panel models)
Glamorizer bars add flavor to food as juices fall on them & are vaporized during cooking.
SHINESTAR 7540-24.5" Flavorizer Bars Replacement for Weber Genesis (3 Burners) 300 Series E-310/E-320 S-310/S-320 EP/CEP-310 & 320 (with Side Control), 24 1/2 inch Stainless Steel Flavor Bar(Set of 5)
- Replacement for Weber Genesis 310 & 320 Series With Side-Mounted Control Panel, model year are 2007-2010. Replacement for Weber 7539 – 24-1/2″ Long Porcelain Coated Flavorizer Bar Set or 7540 – 24-1/2″ Long Stainless Steel Flavorizer Bar Set
- Dimensions: 24 1/2 inch long, 2 3/8 inch wide, 2 3/8 inch high. (Or: 24.5″ H x 2.375″ W x 2.375″ H). Package including set of 5 flavor bars
- Made of heavy duty food grade stainless steel, each bar’s thickness up to 18 GA. Built to long lasting, easy to care for
- The flavor bars are designed pefectly to catch drippings that smoke and sizzle, adding that irresistible smoky flavor and love to your food. Any drippings not vaporized follow the slope and are funneled away from the burners, so to protect burners
- If your grill model is Genesis 300 Series but feature with Front Mounted Control, please refer to SHINESTAR FB7620-17.5 inch Stainless Steel Flavorizer Bar Replacement for Weber Genesis 300 Series with Front Control (Model Years 2011-2016)(SS-WB004)
Replacement for Weber Models with Side Mounted Control Panel as follows:
– Genesis 310 & 320 Series With Side-Mounted Control Panel (2007-2010)
– Replacement for Weber part numbers: 7539/7540
Features:
– Dimension: 24 1/2 inch long, 2 3/8 inch wide, 2 3/8 inch high. (Or: 24.5″ H x 2.375″ W x 2.375″ H)
– Material: 430 Stainless Steel. 400 series stainless steel is superior to 300 series stainless steel when subject to high heats, can withstand the heat needed to grill at any temperature
– Package: Set of 5 flavor bars
– Part number: SS-WB003
Notes:
– Not original Weber part, replace for Weber 7539 – 24-1/2″ Long Porcelain Coated Flavorizer Bar Set or 7540 – 24-1/2″ Long Stainless Steel Flavorizer Bar Set
– These flavor bars are durable, efficient, require minimal care and maintenance
– The thickness of stainless steel bars are heavier than non-stainless ones. Will last longer than non-stainless ones
– You might randomly receive the bars without any hole or with a tiny hole at both ends, which are the same items, made of same material and in same dimension.
– Be sure to check the length of your bars as there are different lengths on the market.
If you need to replace the relevent burner tubes, please refer to SHINESTAR Burner Tube Set for Weber 3 Burner Grills Genesis 310 & 320 Gas Grill
If your grill model is Genesis 300 Series but feature with Front Mounted Control, please refer to SHINESTAR 7620-17.5 inch Flavorizer Bar Replacement for Weber Genesis 300 Series(SS-WB004)
SHINESTAR 17" 66032/66795 Flavorizer Bars for Weber Genesis II 300 Series Gas Grill, Heavy Duty Stainless Steel, 5-Pack
- 【Perfect Fit】Replacement for Weber Genesis II/LX 300 Series gas grills (Model Years 2017 and Newer). Fit for Genesis II LX S/E-340, Genesis II S-310 (2017), Genesis II 310/335 (2019) gas grills
- 【Original Dimensions】Set of 5 packs. Each flavor bar measures 17 1/8″ L×3″ W×2 1/8″ H
- 【Premium Meterial】Made of high quality stainless steel to ensure long-lasting use, possesses the advantages of higher durability and better corrosion resistance
- 【Convenient to Use】These flavor bars will not chip or rust easily like the porcelain bars, which can reduce the sticking of dripping fats and make it easier to clean
- 【Renew the Performance】Used to catch drippings, adding a smoky flavor to your food. Maintains burner quality and minimizes flare ups to enhance the life span of your grill
SHINESTAR Superior Stainless Steel – Huge Upgrade for Your Rust Out Flavorizer Bars
Product Specifications:
Dimensions: 17 1/8″ L×3″ W×2 1/8″ H
Material: Heavy quality stainless steel
Package: 5 x Flavorizer Bars
Perfect Fit:
Fit for Weber Genesis II/LX 300 Series gas grills (Model Years 2017 and Newer):
Genesis II LX S-340
Genesis II LX E-340
Genesis II S-310 (2017)
Genesis II 310 (2019)
Genesis II 335 (2019)
(Do Not Fit Genesis 300 series Grill Models)
Original parts number: 66032, 66795
Features:
√ Made of high quality stainless steel, non-stick oil and easy to cleaning
√ Rust resistant stainless steel meterial do not chip or rust out like the enameled version
√ Durable, prolong the service life without replacing frequently
√ Catch drippings that smoke and sizzle, adding a smoky flavor to food
√ Distributes even heat while protecting burners for optimal performance
Notices:
The listed models are just for reference, please double measure the size and shape of your original parts and compare with ours before ordering
Conclusion
By our suggestions above, we hope that you can found Genesis E330 Flavorizer Bars for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Genesis E330 Flavorizer Bars, eg:
- What are Top 10 Genesis E330 Flavorizer Bars for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Genesis E330 Flavorizer Bars to buy?
- What are Top Rated Genesis E330 Flavorizer Bars to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Genesis E330 Flavorizer Bars?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Genesis E330 Flavorizer Bars.
- Before deciding to buy any Genesis E330 Flavorizer Bars, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Genesis E330 Flavorizer Bars and What you should consider when buying the Genesis E330 Flavorizer Bars and Where to Buy or Purchase the Genesis E330 Flavorizer Bars. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Genesis E330 Flavorizer Bars of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Genesis E330 Flavorizer Bars.
