Pyle Model : PFA600BUCompact Desktop PA Amplifier System Bluetooth Public Address Amplifier – Compact PA Speaker & Microphone Receiver System with (2) Mic Inputs, MP3/USB/SD Readers, FM Radio (300 Watt) Features: PA Public Address Amplifier Receiver Compact Desktop Audio Source System Provides Convenient Microphone & Speaker Control Built-in Bluetooth for Wireless Audio Streaming Integrated Button-Activated Siren Alarm Function FM Radio with Digital LCD Display Connect & Stream Audio from External DevicesMP3 Digital Audio File Playback Compatible USB Flash & SD Memory Card Readers USB Port Doubles as Device Charge Port Quick Connect Speaker Terminals (3. 5mm) Input (2) 1/4’’ -inch Mic Input Jacks (Mic1, Mic2)Front Panel Button Control Center LED Audio Output Indicator Lights Independent Audio Channel Rotary Volume Adjustment Optional 12V DC Power Input Terminals What’s in the Box: PA Amplifier Remote Control FM Antenna Bluetooth Connectivity: Built-in Bluetooth Audio Receiver Simple Pairing for Wireless Music Streaming Works with All of Today’s Latest Bluetooth Devices (Smartphones, Tablets, Laptops, Computers, etc. ) Bluetooth Version: 4. 0Bluetooth Network Name: ‘PYLEUSA’ Wireless Range: Up to 30’+ ft. Technical Specs: Power Output: 300 Watt MAX Frequency Response: +/-3dB, 100Hz-20kHzImpedance: 4/8/16 Ohm. H. D. : S/N Ratio: >70dB, Mic 80dBMic Input Sensitivity: 8mVMaximum USB/SD Memory Support: Up to 32GBDigital File type Playback Support: MP3/WAV/Remote Control Battery: (1) x CR-2025 (included)Speaker Output: 4-16ΩPower Switch Selectable: AC/Off/DC Power Supply: 110V, 60Hz (12V DC Input)Dimensions (L x W x H): 9. 84’’ x 8. 26’’ x 2. 76’’ -inches

Pyle Model : PTA62BT.5

Bluetooth Home Audio Amplifier, 6-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (750 Watt)

Features:

Bluetooth Connectivity:

What’s in the Box:

Technical Specs:

This 750-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won’t find this amplifier lacking. It features a built-in FM radio with digital LCD display. It’s equipped with RCA inputs on the back and two ¼” mic jacks on the front, so you can turn this amp into a karaoke machine – even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. Remote is already included. Runs on 110 and 220 V AC.

Product Description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last.

Features:

From the Manufacturer

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Back View
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.

Switchable Mixing (Karaoke) Mode

When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

USB 2.0 Input Interface with LED Indicator

You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.

.14-Inch AUX-In Jack

The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

.25-Inch Phone Jack

Accepts headphones with .25-inch plugs.

.25-Inch Microphone Input Jack

Accepts microphones with .25-inch plugs.

REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 120 Watt RMS at four Ohms
• Blue LED Output Level Display
• Frequency Response: 20 Hz-20 kHz
• Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
• Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
• Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inches

Enjoy the sweet sound of vinyl, or streaming from your digital music collection. The perfect match for music lovers seeking a stereo system with classic sound from all your music sources. And with the low-profile design, it’s sure to fit into conventional AV cabinets. Power Requirement – AC 120 V 60 Hz

Pyle Model: PDA6BU

Bluetooth Stereo Amplifier Receiver

Compact Home Theater Digital Audio System with FM Radio, USB & SD Memory Card Readers, Aux (3.5mm) Input, Digital LCD Display, Microphone Inputs, 200 Watt

Features:

Bluetooth Connectivity:

What’s in the Box:

Technical Specs:

The Pyle Bluetooth Stereo Amplifier Receiver is the perfect solution for all of your audio needs! Using the latest sound amplification technology, this versatile system is designed to perform and deliver clear, accurate sound. It’s loaded with plenty of audio playback options along with a wide range of device compatibility, so you can connect and play it all! The compact receiver features Bluetooth wireless streaming that works with all of your favorite devices (like a Smartphone, Tablet, Computer, Laptop, etc.). USB Flash and SD Memory Card Readers allow you to quickly stream media from your computer’s media library. Connection Inputs include: Aux (3.5mm) Input, 1/4” Mic jacks, RCA (L/R) Connectors, Banana Plugs, along with a USB port to charge your device. Additional system features include FM Radio, LCD Digital Display, ID3 Digital Song-Tag Readout and an impressive 200 Watt MAX power output! Enjoy versatile and wireless audio streaming ability with the Pyle PDA6BU Bluetooth Stereo Amplifier Receiver System.

Pyle Model : PD3000BA

Home Theater Pro Audio Preamplifier

Bluetooth Home Theater Preamplifier – Audio/Video Receiver System with CD/DVD Player, AM/FM Radio, MP3/USB Reader (3000 Watt)

Features:

Bluetooth Connectivity:

What’s in the Box:

Technical Specs:

The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4” -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices and features hassle-free setup for instant music streaming. Get connected to your entire home theater system including the TV, DVD player, soundbar, subwoofers and multi-channel speakers for full-ranged pro audio stereo sound enjoyment. Rear panel connector types include speaker terminal binding posts, RCA audio inputs, dedicated subwoofer output, digital optical audio output, component S-video connector — along with a headphone jack for private listening. MP3 digital audio file support allows you to playback your entire digital media file library while you configure your sound via the front panel button control center. Enjoy versatile audio entertainment ability with the Pyle Bluetooth Home Theater Stereo Receiver System.

​