Mini Compact and Powerful Amp System
Built-in bluetooth for Wireless Audio Streaming
Compatible with All Your Favorite bluetooth Devices(For iPhone, Android, Smartphone, iPad, Tablet, PC, etc.)
SD Memory Card & USB Flash Drive Readers
RCA Audio Input (L/R)
Dual mic Input Connector Jack
Compatible with Audio/Computerized Devices
Includes Remote Control
Plug: US Plug
Function: bluetooth receive / insert / insert U disk / remote control / FM radio / Cara OK function
Rated impedance: 4 to 8 ohms
RMS: 100W+100W recommends a loudspeaker box with speakers less than 8 inches
Peak power: 200W+200W
Power supply: DC: 12V 5A. AC: 110V
Channel: 2 Channel
Audio input: R/L audio inputuetooth/Line/SD/USB,
Audio output: the left +R right channel output points, positive and negative poles are connected to a speakers.

Package Included:
1 x Sunbuck 29BU bluetooth Amplifier (110V)
1 x Remote Control
1 x User Manual

PyleHome Model : PT4601AIU

Hybrid Home Stereo Amplifier Receiver

Home Theater Receiver System – Hybrid Stereo Pre-Amplifier with AM/FM Radio, USB/SD Reader, 30-Pin iPod Dock (500 Watt)

Features:

What’s in the Box:

Technical Specs:

The Pyle Hybrid Home Stereo Amplifier Receiver – Home Theater Receiver System – Hybrid Stereo Pre-Amplifier with AM/FM Radio, USB/SD Reader, 30-Pin iPod Dock (500 Watt) – Home Theater Audio Receiver – Hybrid Pre-Amplifier Sound System – Connects to TV, Soundbar, Multimedia Speakers – AM/FM Radio with Digital LCD Display – Front Panel Button Control Center – Audio Level Output Display Meter – USB Flash & SD Memory Card Readers – MP3 Digital Audio File Support – RCA (L/R) Audio Input Jacks – Independent Subwoofer Output Jacks – (2) 1/4” -inch Microphone Inputs – Banana Binding Post Speaker Connectors – Built-in 30-Pin iPod Dock – Microphone Echo/Treble/Bass Controls – Radio Station Auto Seek Function – Built-in Cooling Fan – System Includes: Home Pre-Amplifier Receiver, Remote Control, AM/FM Radio Antennas and Power Cable. AM/FM Radio Antennas – Power Cable Power Output: 500 Watt MAX – 200 Watt x 2 @ 8 Ohm RMS – 100 Watt x 2 @ 4 Ohm RMS.

Product Description

The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last.

Features:

From the Manufacturer

Front View
Click here for a larger image

Connection Diagram
Click here for a larger image

Back View
Click here for a larger image

Stereo Power Amplifier
Click here for a larger image

The Ultimate Stereo Power Amplifier

This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.

Switchable Mixing (Karaoke) Mode

When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)

Switchable MIC Pager Mode

When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.

USB 2.0 Input Interface with LED Indicator

You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.

.14-Inch AUX-In Jack

The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.

Push Type Speaker Terminals

Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.

110/220 Voltage Selector

This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.

.25-Inch Phone Jack

Accepts headphones with .25-inch plugs.

.25-Inch Microphone Input Jack

Accepts microphones with .25-inch plugs.

REC RCA Output

Lets you connect the amplifier to a tape deck for recording.

Take Control

Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble

Replaceable Power Fuse

The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)

Additional Features

• Harmonic Distortion: 0.3%
• 2 x 120 Watt RMS at four Ohms
• Blue LED Output Level Display
• Frequency Response: 20 Hz-20 kHz
• Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
• Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
• Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
• Dimensions: 8.27 x 2.72 x 5.39 inches

Pro audio amplifier – 70V PA speaker public address amplifier Receiver with XLR microphone inputs, mic talk over, rack mount (300 watt max)

features:
Pro audio 70 volt amplifier> stage & studio PA public address receiver system
multi-channel sound reinforcement amplifier
front panel Audio Control Center> lighted audio signal Vu meter
aux (3.5mm) input> 1/4” -Inch headphone jack
RCA (L/R) aux audio inputs> (4) microphone inputs (1/4” -Inch & 3-pin XLR jacks)
microphone priority talk-over function (mic 1 inputs> speaker outputs: com/ 4 Ohm/ 8 ohm/ 16 ohm/ 70v
Master Audio output Level adjustment> independent Channel volume controls> feedback filter adjustment
EQ/ bypass, phono switch> clipping & protection LED indicator lights> heavy duty aluminum heatsink
power on/ off switch> universal rack mount designed> used with audio mixers, PA speaker systems, sound processors
technical specs:
power output: 300 Watt max (100 Watt @ 8 ohm)
frequency response: 75 – 20Khz, XLR mic
T.H.D.: >0.5% S/N ratio: 60dB, phono
input sensitivity: 150mV (aux inputs> notch filter: -12db
fuse: 3a, 250v
power supply: 120/240V, voltage selector> Dimensions (L x w x H): 19.0” X 11.9” X 4.9” -Inches> Sold as: unit
weight: 22.36 lbs.

PyleHome Model : PT720A

AM/FM/ Tuner Hybrid Amplifier

1000 Watts AM/FM/ Tuner Hybrid Amplifier W/ 70V Output

Get professional-quality sound and tons of features with this 1000-watt amplifier! The PT720A is well suited for large rooms, including stadiums, auditoriums, and for events when your sound needs to make an impact. It’s got plenty of inputs, including two 1/4” mic inputs and a 3.55m jack for your iPod or MP3 player on the front, . It pushes audio over standard speaker jacks at 4, 8, and 16 ohms – or connect to your 70 V PA system. And this amp doesn’t just sound great – thanks to the digital fluorescent output display meter and blue LED lighting, it looks great too. Includes a wireless remote control. Runs on 110 or 220 V.

Pyle Model : PMSA126BUCompact Desktop PA Amplifier System Bluetooth Public Address Amplifier – Compact PA Speaker & Microphone Receiver System with 70V/100V Output, MP3/USB/SD Readers, FM Radio (500 Watt) Features: PA Public Address Amplifier Receiver Compact Desktop Audio Source System Provides Convenient Microphone & Speaker Control Built-in Bluetooth for Wireless Audio Streaming Integrated Button-Activated Siren Alarm Function FM Radio with Digital LCD Display Connect & Stream Audio from External DevicesMP3 Digital Audio File Playback Compatibles Flash & SD Memory Card Readers USB Port Doubles as Device Charge Port RCA (L/R) Audio Inputs Aux (3. 5mm) Input (2) 1/4’’ -inch Mic Input Jacks (Mic1, Mic2)Speaker Output: 100V/70V/16 Ohm/8 Ohm/4 Ohm/Comfort Panel Button Control Center Audio Output Level LED Indicator Lights Independent Audio Channel Rotary Volume Adjustment Optional 12V DC Power Input Terminals What’s in the Box: PA Amplifier Remote Control FM Antenna Bluetooth Connectivity: Built-in Bluetooth Audio Receiver Simple Pairing for Wireless Music Streaming Works with All of Today’s Latest Bluetooth Devices (Smartphones, Tablets, Laptops, Computers, etc. ) Bluetooth Version: 4. 0Bluetooth Network Name: ‘PYLEUSA’ Wireless Range: Up to 30’+ ft. Technical Specs: Power Output: 500 Watt MA Frequency Response: +/-3dB, 100Hz-20kHzImpedance: 4/8/16 Ohm. H. D. : S/N Ratio: >90dB, Mic 80dBMicrophone Sensitivity: 12mVUSB/SD Flash Memory Support: Up to 32GBDigital File type Playback Support: MP3/WAV/WMA Remote Control Battery: (1) x CR-2025 (included)Power Switch Selectable: AC/Off/DC Power Supply: 110V, 60Hz (12V DC Input)Dimensions (L x W x H): 11. 8’’ x 10. 2’’ x 3. 14’’ -inches

This 60 watt power amplifier provides the juice you need for your 25 V or 70 V PA speaker. Connect up two mics using the rear terminals, plus an auxiliary RCA input. Each input has an independent gain control, and you can also adjust the tone of the sound using the rotary treble and bass faders. Connect your speakers using the rear terminals. This unit is also equipped with an unswitched 500W max grounded power outlet on the back. Also capable of music-on-hold. Includes a replaceable fuse and detachable AC power input. Runs on 110 or 220 V.