Top 10 Bosch 4100 Table Saw Accessories

Product description

Bosch TS1004 Dust Bag & Elbow for 10″ Table SawBosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch TS1004 Dust Bag & Elbow for 10″ Table Saw Features: Table Saw Dust Collection System. Model TS1004. Keeps work area clean, easily attached and emptied. Table Saw Attachments Part No. TS1004 Used on Model No. 4000 Sales Pack Quantity 1

From the Manufacturer

This Bosch TS1004 Table Saw Dust Collector Bag provides up to 70% dust collection. For model no. 4000 10-inch tablesaw.

The Bosch TS1008 left side support extension increases the width of your table. This attachment can be used with the Bosch 4000, 4100 and GTS1041A table saws. This provides additional support for cutting larger work pieces.

Bosch TS1016 extends 18-Inch and stores flush to table. It extends the working depth of Bosch 4000, 4100, GTS1041A 10-inch table saw. It features hardened metal construction; aluminum mounts and includes table saw extension. The table saw is not included.

HQRP Dust Collector Bag can be used with table saws that have 2-1/2 inch dust ports on the exterior of the saw.
Compatible with the Bosch part TS1004 Dust Bag, Bosch 4000, 4100, GTS1031, GTS1041A Table Saws, DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws / Planers, etc.
It collects up to 70% of the generated saw dust. Easy to install. Easy to empty. Includes wire frame for attaching bag to table saw’s dust port and for support of top seam of bag. Crafted out of heavy cloth material with sturdy zipper for trouble free emptying.
Dimensions: L 29″ x W 13″ head side x W 9″ end side, diameter of ring 2.5″ up to 2 7/8″.

HQRP Dust Collector Bag compatible with the Bosch 4000, 4100, GTS1031, GTS1041A Table Saws, part TS1004 Replacement.
It also can be used with other table saws that have 2-1/2 inch dust ports on the exterior of the saw.

It collects up to 70% of the generated saw dust. Easy to install. Easy to empty. Includes wire frame for attaching bag to table saw’s dust port and for support of top seam of bag. Crafted out of heavy cloth material with sturdy zipper for trouble free emptying. Dimensions: L 29″ x W 13″ head side x W 9″ end side, diameter of ring 2.5″ up to 2 7/8″.

p>The fence improves safety and accuracy when cutting or sanding and makes it easy to cut perfect mitres quickly.

The solid steel protractor head features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°, both left and right. 13 pre-set common angles in total.

The bar is 18″ long with a removable locking washer making it usable with any standard 19 x 9.5mm (3/4″ x 3/8″) track or similar sized T-slot.

Four sprung loaded ball bearings keep the bar snug in the track; the fence runs true without side-play.

Product Description

Cut perfect miters consistently with Kreg’s Precision Miter Gauge System. A number of unique features makes this one of the most precise miter gauges on the market today. Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. A 24″ fence section with patented Swing Stop and self-adhesive measuring tape is included. Factory calibrated.

Amazon.com

We’ve found that even on high-end saws, the miter gauge is sometimes not the best it could be – a situation easily resolved by the folks at Kreg. You probably know them for their ingenious pocket hole system, but this miter gauge is worthy of fame in its own right.

It’s not like any we’ve seen before, with a handful of features that work together to give you the ability to set an angle cut accurately to 1/10th of a degree – and beyond that, to adjust to 1/100th of a degree (hats off to you if you’re that precise!)

Setup takes a little bit of time and patience, but the results are well worth it. It’s got a super accurate length scale with a magnifying lens cursor, similar to those on good table saws, and the curved flip stop can be used with the fence as is, or you and a pair of pliers can modify it easily for permanent use with a sacrificial fence. This clever curved design lets you slide your stock right under it. The slot bar has five patented nylon screws along its length that let you custom fit it to your table saw slot, completely eliminating any play.

It’s got the positive stops you expect, at 0, 22.5, 30 and 45 degrees, and they’re marked by preset holes that accept a tapered brass pin, which locks in the angle with absolute precision. The gauge is marked with diamonds every five degrees for great legibility, too. But what sets this gauge apart from the pack is its Vernier scale, allowing you to set any angle in tenth-of-a-degree increments. Unless you have a degree in mathematics, don’t try to understand the process – it’s confusing and non-intuitive. Instead, just follow the step-by-step directions, and you’ll get absolute accuracy every time.

And when Kreg calls something a “micro-adjustment” mechanism, they really mean micro. With this miter gauge, you can actually increase your angle by 1/100th of a degree by turning a nylon screw that increases the space between the fence and the gauge. For each .001 inch you put between the fence and gauge, you increase your angle by 1/100th of a degree.

Kreg’s really hit the accuracy bullseye with this miter gauge, and adding it to even a so-so saw will give you fantastic results. Take your time with setup and follow the directions for the Vernier scale, and you’ll be as taken with it as we are. — Kris Jensen-Van Heste

See all Product description

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Bosch 4100 Table Saw Accessories, eg:

• What are Top 10 Bosch 4100 Table Saw Accessories for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Bosch 4100 Table Saw Accessories to buy?
• What are Top Rated Bosch 4100 Table Saw Accessories to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Bosch 4100 Table Saw Accessories?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Bosch 4100 Table Saw Accessories.
• Before deciding to buy any Bosch 4100 Table Saw Accessories, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Bosch 4100 Table Saw Accessories and What you should consider when buying the Bosch 4100 Table Saw Accessories and Where to Buy or Purchase the Bosch 4100 Table Saw Accessories. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Bosch 4100 Table Saw Accessories of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Bosch 4100 Table Saw Accessories.