Top 7 Building A Kegerator Out Of A Fridge

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature.
For example, you can use the controller to turn on a heater at 99.9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45.3 F.
(Please be noted that the controller itself doesn’t change temp. You need to use heater or refrigeration equipment with it.)

Main features:
1-YEAR WARRANTY: From the date of purchase.
Plug and play. No worry about wiring.
Maximum load: 880W @110V or 1960W @240V.
Heating OR refrigeration working mode.
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0.)

Specification:
1.Power supply: AC 110V 50/60Hz
2.Measure range: -58 ~ 230 F(-50 ~ 110 C)
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 0.1 – 230(difference between turn-on degree and turn-off degree)
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×3.6×1.8 inch (12.5×9.1×4.5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)

Package Content:
1x WH1436A Temperature controller
1x sensor cable

You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge

BPV-31 bullet piercing tap valve:

Good quality and easy to install. 
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs. 
Corrosion resistant. 

Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes. 

Material: metal 
Quantity: 2 packs 
Color: sliver 

R12 R22 charging hose with gauge：

R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.

Material: copper and rubber
Quantity: 1 piece

Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge

Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe. 
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.

Description:
A keg coupler is a key element of any draft beer system. It’s a small but vital piece of equipment that connects the gas and beer lines to your keg. Pressurized gas (either carbon dioxide or nitrogen depending on the type of beer being dispensed) flows into the side of the keg coupler through an air line and the beer flows out through a beer line attached to the top.
You can keep those kegs flowing free with the D System Beer Tap Coupler 304 Stainless Steel Probe and its smooth, reliable operation. This tap coupler securely mounts with a twist to dispense beer in seconds. To ensure the purity of flavor and drink, only 304-grade Stainless Steel probe comes in contact with the beverage.
 
Specification:
Condition: 100% Brand New
Item Type: Beer Dispenser
Material: Stainless Steel + Copper
Color: Silver
Size: Approx. 17.5*12.5cm / 6.9*4.9inch

Package list:
1 x Beer Dispenser
6 x Fittings

Notes:
1. The actual product color may deviate from the photo due to light.
2. There may be a slight deviation in the measurement of product.

Product Description

This is an O.E.M. Authorized part. Fits with various GE brand models. Oem part # WR50X10068.

From the Manufacturer

General Electric WR50X10068 Defrost Thermostat for GE Refrigerators is also used on Hotpoint and other refrigerator brands

Designed specifically for use in National Electrical Code (N.E.C.) Article 547 applications requiring a rugged, weather resistant, durable control for both heating and cooling (ventilation) in agricultural, industrial and commercial environments. The T115 is suitable for use in animal confinement environments as well as factories, warehouses, garages and gymnasiums. The unit will tolerate spraying with water, high humidity, airborne contaminates and moderately corrosive conditions.

Too often, attic ventilation is overlooked, not to mention ignored as a place for energy savings. That’s where Broan solutions make sense. Consider this: air trapped in your attic can easily reach 150 degrees or more. With Broan ventilation solutions, it’s still a full 60 degrees cooler in the attic on a 90 degree day. That’s why attic ventilation is critical to making any home more comfortable while lowering energy costs. Air conditioners can run less and won’t have to work as hard. Humid, stagnant air can be removed, drawing fresh dry air across the surfaces. Your attic can be drier and cooler – the perfect tools to help fight potential moisture damage. Each PVC dome is available in three popular performance ratings along with two metal dome models. Select one that best suits the attic size and shingle color. Attic Size: Up to 1400 sq. ft. Amps: 4.3, CFM: 1000, Dome Diameter: 23-1/4, Dome Material: PVC

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Building A Kegerator Out Of A Fridge, eg:

• What are Top 10 Building A Kegerator Out Of A Fridge for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Building A Kegerator Out Of A Fridge to buy?
• What are Top Rated Building A Kegerator Out Of A Fridge to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Building A Kegerator Out Of A Fridge?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Building A Kegerator Out Of A Fridge.
• Before deciding to buy any Building A Kegerator Out Of A Fridge, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Building A Kegerator Out Of A Fridge and What you should consider when buying the Building A Kegerator Out Of A Fridge and Where to Buy or Purchase the Building A Kegerator Out Of A Fridge. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Building A Kegerator Out Of A Fridge of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Building A Kegerator Out Of A Fridge.