carerhome 
Nowadays, there are so many products of electronic crossover home audio in the market and you are wondering to choose a best one.You have searched for electronic crossover home audio in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings electronic crossover home audio which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Nady CX-23SW 3-Way Stereo, Plus Subwoofer Crossover – Fits in a 19" Single Rack Space (1U) – For multi-amplifier setup
Technical Pro XO3 3 Way Crossover with Subwoofer Output, 20Hz-25kHz 1dB Frequency Response, Black
Amazon.com
- Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover. Ability to mix 2 channels output. 24dB/Octave filters. Mute switches.
- Channel Gain Control: 0 to +12 dB. Low Frequency Level Control: -∞ to +6 dB. High Frequency Level Control: -∞ to +6 dB.
- Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes. Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz).
Crossover: Sub: 50-250Hz; Lo/Mid 70-1000Hz; Mid/Hi 480-7000Hz Frequency Response: 20Hz-25kHz 1dB Low Cut Filters: 30Hz / -3dB, 12dB/Octave Inputs: 1/4" (6.35mm) Outputs: Balanced XLR, 1/4" (6.35mm) Total Harmonic Distortion: <0.05% Signal to noise ratio: >95dB Impedance: Input – 100 Kohms, Output – 220 ohms Dimensions: 19"w x 1.75"h x 5.75"d (483 x 45 x 146mm) Weight: 5.5 lbs (2.5 kg) 110-220V Switchable
Rockville RX230 2 Stereo / 3 Way Mono Crossover with XLR Input and Output
Amazon.com
- Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art Linkwitz-Riley filters with 24 dB/octave
- Additional subwoofer output with independent Frequency control
- Absolutely flat summed amplitude response, zero phase difference
- Individual output Gain controls for all bands
- Individual output Mute switches for easy band adjustment
Features:
Rockville RX230 2-way Stereo / 3-way Mono rack mountable crossover
Ability to mix 2 channels output
24dB/Octave filters
Mute switches
Channel Gain Control: 0 to +12 dB
Low Frequency Level Control: -∞ to +6 dB
High Frequency Level Control: -∞ to +6 dB
Low Frequency to High Frequency crossover: 100Hz to 1 Khz x10 range: Changes
Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz)
Switchable 2-way stereo or 3-way mono operation
Subwoofer out
Subwoofer X-Over Freq ( 30Hz – 200Hz ) adjustable
Subwoofer Gain -6 to +6 dB
Specifications:
Each output is -3 dB at the selected crossover frequency value. Outputs are
essentially flat within their relative passbands.
Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB;
22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) – 90dB
Low Frequency Output: -86 dBu below 80 dB
High Frequency Output: -84 dBu below -78 dB
Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0
dB) +22 dBu
Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
Input Impedance: 10k ohms unbalanced
Dimensions: 19 x 4.85 x 1.8 inches
Gross weight: 4.18 Lbs
Connectors:
Inputs: XLR Balanced
Outputs: XLR Balanced
Power Requirements: 120V AC, 50/60 Hz, 20 watts
110-120V voltage
Behringer Super-X Pro CX2310 Professional High-Precision Stereo 2-Way/Mono 3-Way Crossover with Subwoofer Output
Amazon.com
- Offers the same quality and performance of the EC20B in a two way (high-pass / low-pass) configuration
- Variable Low Pass: 35 Hz to 400 Hz, Variable High Pass: 50 Hz to 1.5 kHz
- Crossover Slope: 6 dB / octave, Independent Front and Rear Level Controls
- S / N: ≥ 85 dB, DC-to-DC power supply
- Subwoofer Phase, Remote Subwoofer Control
- Variable Bass Boost 0 to +12 dB @ 45 Hz
BEHRINGER SUPER-X PRO CX2310
High-Precision Stereo 2-Way/Mono 3-Way Crossover with Subwoofer Output
- Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art Linkwitz-Riley filters with 24 dB/octave
- Additional subwoofer output with independent Frequency control
- Absolutely flat summed amplitude response, zero phase difference
- Individual output Gain controls for all bands
- Individual output Mute switches for easy band adjustment
- Individual Phase reverse switches for instant phase correction
- Switchable 25 Hz Low cut filter on each input for low-frequency driver protection
- Servo-balanced and gold-plated XLR connectors for all inputs and outputs
- Individual Phase reverse switches for instant phase correction
- Switchable 25 Hz Low cut filter on each input for low-frequency driver protection
- Servo-balanced and gold-plated XLR connectors for all inputs and outputs
- Ultra-high precision potentiometers for ultimate accuracy and repeatability
- Illuminated switches for secure operation in dark stage environments
- Shielded toroidal mains transformer for minimal noise interference
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The CX2310 2-way stereo/3-way mono crossover features absolute precision, state-of-the-art circuitry, with superior-grade components, ultra low-noise op amps and balanced inputs and outputs. Additionally, the CX2310 provides an independently adjustable subwoofer output, effectively providing an extra low-frequency band, which is adjustable from 10 Hz to 235 Hz.
Sound Quality
When a sound system is tuned properly, it becomes powerful, balanced and efficient. Bass content is punchy and tight, with vocals and instruments that are rich, crisp and well defined. The CX2310 crossover’s accurate signal processing protects critical loudspeaker components and improves overall system efficiency.
What’s a Crossover?
Chances are if you’re reading this, you already know what a crossover is and you know that you need one. But if you are new to multi-way PA systems, here is a brief overview.
Loudspeakers (which we call transducers) convert electrical signals into sound waves. And no matter how well a transducer is designed and made, it simply cannot reproduce the entire audio spectrum all by itself. Low-frequency sounds tend to push a transducer to its maximum, making it impossible for that same transducer to reproduce the treble content with the sound quality it deserves. (Try singing high falsetto next time you’re bench-pressing your limit!)
That is why high-quality sound systems use multiple speakers (woofers and tweeters) to share the work. When the woofer (usually the larger transducer) does all the heavy lifting, the tweeter can easily handle the high-frequency stuff. Three- and four-way systems distribute the work even more, allowing the individual transducers to reproduce the frequency range they are best suited to. It is the crossover’s function to divide these tasks between the various transducers.
Divide and Conquer
The CX2310 provides two modes of operation: 2-way stereo, for left and right Lows (woofers) and Highs (tweeters); and 3-way mono, for Lows, Mids and Highs. In either mode, there is an additional output provided for a mono subwoofer with its own frequency range and level controls. This extra feature effectively turns the CX2310 into a stereo 2-way + mono 1-way, or a mono 4-way frequency crossover. The subwoofer signal is presented in mono, since people tend to perceive really low bass frequencies as coming from all directions.
By using 1% metal film resistors, along with other extremely tight-tolerance components, the CX2310 is able to guarantee surgically precise frequency selection with incredibly low thermal noise. State-of-the-art, ultra low-noise op amps ensure super-quiet operation. CX3400’s elegant LED matrix shows at a glance which operation mode is selected and which controls are active.
Getting Connected
All of the inputs and outputs accept balanced and unbalanced XLR connections. The inputs feature 25 Hz Low Cut filters for low-frequency driver protection. Mute and phase invert switches are provided for each frequency range, making troubleshooting an entire loudspeaker system a breeze.
Value
Stop by your authorized BEHRINGER dealer today and demo the CX2310, the super-affordable way to optimize the performance of your sound system.
Planet Audio EC10B 2-Way Electronic Crossover With Remote Subwoofer Control
Amazon.com
- AUDIO CROSSOVER: Lanzar Vibe 3 way electronic crossover network features hi-pass and low-pass crossover. Hi-pass crossover has 32Hz - 800 kHz frequency response for front and rear channels. Low-pass crossover has 50Hz - 160 kHz for subwoofer channel
- POWER LED INDICATOR: This indicator will light up when switching power supply is activated, and the unit is operational. Also, pack with remote subwoofer level control and parallel input switch, mixed in/out switch
How A Crossover Is Used
The Planet Audio EC10B two-way electronic crossover is a high-fidelity signal processor that allows you to customize the low level output of your input source (such as a car radio), so that the signal can be applied to an amplifier or amplifiers as a part of a two-way mobile audio system. It is intended for use in a car audio system which includes amplifiers in the signal path after the crossover, and provides front, rear, and subwoofer low level outputs via RCA connectors.
View larger
Input, Output, Remote, And Power Connections
- Power LED
- Remote Level Control Connector
- Left/Right Low Level (RCA) Inputs: If your head unit has low level (RCA) two-channel outputs, connect the outputs of your head units to these connections.
- Left/Right High Level (speaker) Inputs: If your head unit lacks low level (RCA) two-channel outputs, connect the outputs of your head units to these connections. Do not connect both high level and low level inputs to the EC10B.
- Left/Right Low Pass (Subwoofer) Outputs
- Left/Right High Pass (Highs/Mids) Outputs
- +12V, Ground And Remote Turn-On Terminals: Use this control to select the highest frequency to be sent to the subwoofer channel. Choose a frequency between 50 Hz and 250Hz.
- Fuse Connector: Use only fuse with 3A rating
View larger
Front And Rear Channel Controls
- Output Level Control: Use this control to set the output level for the low pass (subwoofer) channel.
- Bass Boost Level Control: Use this control to set the amount of bass boost which will be added to this channel.
- Low Pass Frequency Control: This control will set the highest frequency which will pass through the low pass (subwoofer) channel of your system.
- Output Mode Selector: Use this to select either Mono or Stereo signal output to be delivered to the low pass (subwoofer) outputs.
- Phase Selector: This control will let you select the output phase of the low pass (subwoofer) channel for the best time alignment and imaging.
- Output Level Control: Use this control to set the output level for the high pass (Highs/Mids) channel.
- Low Pass Frequency Control: This control will set the lowest frequency which will pass through the high pass (Mids/Highs) channel of your system.
- Left And Right High Level (speaker) Input Gain Controls: If you are using the high level inputs, use these controls to set the high input gain levels for each channel.
Upgraded 3-Way Electronic Audio Crossover – Network Hi-Pass and Low-Pass Channel 12dB Octave Slope Power LED Indicator w/Remote Subwoofer Control and Parallel Input Switch – Lanzar Vibe VIBEX6
Amazon.com
- Provides three Filter circuits for a variety of set-up options
- Variable Low Pass: 32Hz to 250Hz, Variable High Pass: 40Hz to 400Hz.Bass Generator : Frequency response 10 Hz to 20 kHz, ±1 dB
- Frequency Multiplier: x1 or x20, Selectable Slope: 6dB or 18dB / octave
- Independent Front and Rear Level Controls, S / N: ≥ 85dB
- DC-to-DC Power Supply, Outputs for 3-Way or Front, Rear and
- Subwoofer System Configurations, Remote Subwoofer Control
3-Way Electronic Crossover Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channels X10 Frequency Multiplier For Front Channel Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel 18dB Per Octave Crossover Slope Variable Bass Frequency: 40Hz-120kHz Boost Level: 0-12dB Parallel Input Switch, Mixed In/Out Switch Remote Subwoofer Level Control Power On LED Indicator Dimensions: 7.5H x 7W x 1.4D
Planet Audio EC20B 3-Way Electronic Crossover With Remote Subwoofer Control
How A Crossover Is Used
The Planet Audio EC20B three-way electronic crossover is a high-fidelity signal processor that allows you to customize the low level output of your input source (a car radio), so that the signal can be applied to an amplifier or amplifiers as a part of a two-way or three-way mobile audio system. It is intended for use in a car audio system which includes amplifiers in the signal path after the crossover, and provides front, rear, and subwoofer low level outputs via RCA connectors.
Parallel Input Selection
The EC20B is optimized for head units which provide outputs for Front (UR), Rear (UR), and Subwoofer (UR) channels. But what if your head unit only provides a single pair of stereo (UR) outputs? By setting the Parallel Input selector control to Out, the signal applied to the Front (UR) EC20B inputs will also be routed to the Rear channel. This eliminates the need for external Y-adaptors, which can sometimes add noise to the system. Now you can provide custom processing to the Rear channel independent of the settings you apply to the front.
Specifications
- Crossover center frequency ranges: Front (high pass) – 40-400Hz or 800Hz-8kHz; Rear (high pass) – 40-400Hz; Subwoofer (low pass) – 32-250Hz
- Crossover slope, front and rear: selectable 6d8/octave or 18d8/octave
- Crossover slope, sub channel: 18dB/octave
- Bass Boost center frequency range: 25-250Hz
- Bass Boost level adjustment: 0-+12dB
- Signal-to-Noise Ratio: 110dB
- THD: 0. 01%
- Channel separation: 80dB
- Input impedance: 20kOhms
- Output impedance: 100 Ohms
- Output gain: 1:2 (+6dB)
- Power supply: PWM type
- Output voltage: 8V maximum1
- Dimensions (W x D x H): 5-1/8″ x 8-1/4″ x 1-3/4″
Front Channel Crossover Multiplier
By providing a way for you to select a frequency from either a Mids/Highs range or a Tweeter range for the Front channel crossover, we give you the choice to use this crossover in different applications. For example, you can use the Front channel as a stereo Tweeter channel by setting the Crossover Frequency Multiplier to the higher 800Hz-8kHz range, and Rear channel can serve as the Mids/Highs channel, for a three-way stereo system. Or you could create a four-channel system, with Front and Rear channels reproducing the Mids/Highs.
Subwoofer Input Mix Option
Many head units also lack a subwoofer channel output. In this situation, by setting the Sub Input control to Mix, the EC20B sub channel controls will be delivered a mix of L Front/Rear to the Subwoofer Left Channel and a mix of the R Front Rear to the Subwoofer Right channel. This eliminates the need for external Y adaptors and mixer devices.
View larger
Input, Output, Remote, And Power Connections
- Power LED
- Front And Rear L/R Inputs: Connect the outputs of your head units to these connections and be sure to place the Parallel Input selector in the In position.
- Parallel Input Selector: If your audio source only has one pair of RCA inputs, placing this switch in the Out position allows the signal source connected to the front inputs to also be routed to the rear channel of the EC20B.
- Sub Input Source Selector: If your audio source lacks a subwoofer channel output, placing this switch in the Mix position will apply a mix of the front and rear channel of each of the left and right inputs to the EC20B sub channel input.
- Subwoofer Channel Input: Connect the subwoofer channel of your head unit to these connectors and place the Sub Input selector in the Direct position. If no sub channel outputs are available, see “Sub Input Source,” above.
- +12V, Ground And Remote Turn-On Terminals: Use this control to select the highest frequency to be sent to the subwoofer channel. Choose a frequency between 32 Hz and 250Hz.
- Fuse Connector: Use only fuse with 3A rating.
- Front And Rear UR Outputs
- Subwoofer L/R Outputs
- Remote Level Control Connector
View larger
Front And Rear Channel Controls
- High Pass Crossover: Use this control to set the lowest frequency which will pass through the Front (or Rear) Channel of your system.
- High Pass Crossover Frequency Multiplier (front channel only): This selector sets the frequency range for the high pass crossover. Choose the x1 position for 40Hz-400Hz range, or x20 for 800Hz-8kHz range.
- Crossover Slope: Crossover slope determines how rapidly the drop-off in sound level, measured in decibels/octave, occurs at the frequency selected by the crossover. One octave is equal to one-half of the currently selected frequency. For example, if you set the crossover to 80Hz and the slope to 18dB, the level at 40Hz to be 18dB lower than at 80Hz.
- Output Level Control: This control allows you to independently set the output level of the channel.
NEW AUDIOPIPE XV-3XP 3-WAY Electronic Crossover With Line Driver + Bass Knob
Amazon.com
- 2-WAY MOUNT SPEAKER: The pair of 10” full range stereo sound speaker has two way of installation: in-wall or in-ceiling flush mount. It has convenient spring-loaded clips for easy installation perfect for custom installations and applications
- FLUSH MOUNT DESIGN: A pair of flush mount design midbass speaker for simple and easy in-wall / in-ceiling installation. The product includes the cutout dimension at 10.9” in diameter x 4.0” in depth and environmentally friendly ABS construction
3-Way Variable Crossover w/ Line Driver
10” Ceiling Wall Mount Speakers – Pair of 2-Way Full Range Sound Stereo Speaker Audio System Flush Design w/Electronic Crossover Network 35Hz-20kHz Frequency Response & 250 Watts Peak – Pyle PDIC106
PyleHome Model : PDIC106
10.0” Home In-Wall / Ceiling Speakers
10.0″ In-Wall / In-Ceiling Dual Stereo Speakers, 2-Way Flush Mount (250 Watt)
Features:
- In-Wall / In-Ceiling System
- 2-Way Stereo Sound Speakers
- Includes (2) 10.0-inch Speakers
- 1/2” High Compliance Polymer Tweeter
- Polypropylene Cone with Rubber Edge
- Mounts Flush on Walls or Ceilings
- Built-in Electronic Crossover Network
- Perfect for Custom Installations & Applications
- Includes Changeable Round & Square Stain Resistant Speaker Grills
- Cut-Out Template for Easy Installation
What’s in the Box:
- (2) 10” -inch Wall Speakers
- (2) Round Speaker Grills
- (2) Square Speaker Grills
Technical Specs:
- 250 Watt Rated Peak Power
- Impedance: 8 Ohm
- Sensitivity: 89 dB
- Frequency Response: 35Hz-20kHz
- Total Unit Dimensions (Diameter x Depth): 12.4” x 4.3” -inches
- Cutout Diameter: 10.9”, Cutout Mounting Depth: 4.0” -inches
The Pyle PDIC106 two-way dual speakers deliver stereo sound to any room in your home or office without cluttering floor space. Each unit in the pair measures 10.0” diameter and come equipped with .5” high compliance polymer tweeter for a full, rich sound. Speakers are made of ABS material and include stain resistant grills. System comes with changeable round and square grill covers and cut-out template for easy and quick installation. They mount flush for a clean look on walls or ceilings. Achieve more wide-ranged sound performance and add audio to any room with the PDIC Dual Stereo Speaker Systems.
Car Home Amplifier Subwoofer Equalizer Crossover RCA Adjust Line Level Volume
Amazon.com
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH - A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME - Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion. PSW Series subwoofers blend perfectly with systems composed of other Polk loudspeakers, especially TSi, RM and R/T/M Series speakers
Dimensions: 55 * 50 * 40mm
Color: Black
Conductor Material: Tinned Copper
Number of cores: 8
Jacket Material: PVC
The largest wire diameter: 7.5 (mm)
Two kinds of adjustment method: 1 by the gain adjustment, 2 through frequency adjustment.
Polk Audio PSW10 10"Powered Subwoofer – Featuring High Current Amp and Low-Pass Filter | Up to 100 Watts | Big Bass at a Great Value | Easy integration Home Theater Systems
PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.
EMB PRO 3 WAY CROSSOVER + SUB WOOFER Control EBX79
3 Way Crossover Sub Woofer Control Rack Mount 110V/220V
