carerhome 
Nowadays, there are so many products of home audio amplifier 3 inputs in the market and you are wondering to choose a best one.You have searched for home audio amplifier 3 inputs in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home audio amplifier 3 inputs which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Bluetooth Mini Home Audio Amplifier – Compact Desktop Home Theater Stereo Amplifier Receiver with USB Charge Port | Pager & Mixer Karaoke Modes | Mic Input (40 Watt x 2) | Pyle PTA22BT
Amazon.com
- Small simple compact design but practical and powerful, Hi-Fi Bluetooth amplifier exclusively designed for the customers who pursue HiFi sound
- Bluetooth 4.2 core, up to 33ft connection range guarantees low signal delay. No pop, no audible noise when Bluetooth connection is established
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers, (For passive speakers only, not the powered speakers.)
[Updated] BT20A Bluetooth 4.2 Stereo Audio 2 Channel Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116 (with Power Supply)
Amazon.com
- Adopt Texas Instruments TDA7498E chip to get clear audio sound, No pop, no audible noise, dead silent when nothing is playing through it.
- 160W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), for outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers, can use iPod, Phone, MP3 players, TV, Echo Dot, CD players, or Streaming Media players as input.
- 2.0CH audio integrated amplifier, aluminum enclosed, small size, good looks, simple functionality, and excellent sound quality
TDA7498E 2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp for Home Speakers 160W x 2 + 24V Power Supply
Amazon.com
- 2x75 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your home theater acoustic surround sound system. Gives you 2x75 watts peak power which can be used for subwoofer speakers w/ 4-8 ohms impedance, enjoy high quality music and movie
- MULTIPLE SOURCES: This small personal portable digital amp box lets you connect external audio sources such as tuner, CD DVD player, tape deck, camcorder, VCR to the 3.5mm RCA (L/R) LINE input and enjoy enhanced amplified acoustic audio reproduction
Home Audio Power Amplifier System – 2X75W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED – For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA – Pyle PCA3
Amazon.com
- 2X120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your PA & home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4-8 ohms impedance, enjoy high quality music & movies
- MULTIPLE INPUTS: This personal portable digital amp box supports various external sources - 3 3.5mm AUX for tuner, CD DVD, MP3, computer, iPad, iPhone & cell phone, 1/4" mic in & 1/4" headphone jack input. Also features a REC RCA output for recording
Product Description
The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device–you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA3 runs on 110V or 220V with a voltage selector switch.
From the Manufacturer
Click here for a larger image
Click here for a larger image
Click here for a larger image
Click here for a larger image
The Ultimate Stereo Power Amplifier
This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.
110/220 Voltage Selector
This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
Compatibility
Compatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.
RCA L/R Line Input
Lets you connect the desired line input source.
Take Control
Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.
Push Type Speaker Terminals
Lets you easily connect speaker wires directly to the amplifier.
Replaceable Power Fuse
The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse –not included)
Additional Features
- Harmonic Distortion: 0.3%
- 2 x 75 Watt RMS at 4 Ohm
- Blue LED Output Level Display
- Frequency Response: 20 Hz-40 kHz
- Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
- Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
- Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
- Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)
Pyle 2X120 Watt Home Audio Power Amplifier – Portable 2 Channel Surround Sound Stereo Receiver w/ USB in – for Amplified Subwoofer Speaker, CD DVD, MP3, iPhone, Phone, Theater, PA System – PTAU45
Amazon.com
- Perfectly suited for your desktop or a smaller space in your home or office, digital amplifier is easy to connect to your audio system with no software to install or settings to change
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers
- Simple compact design but practical and powerful
- No pop, no audible noise, dead silent when nothing is playing through it
Product Description
The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last.
Features:
From the Manufacturer
Click here for a larger image
Click here for a larger image
Click here for a larger image
Click here for a larger image
The Ultimate Stereo Power Amplifier
This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.
Switchable Mixing (Karaoke) Mode
When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)
Switchable MIC Pager Mode
When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.
USB 2.0 Input Interface with LED Indicator
You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.
.14-Inch AUX-In Jack
The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.
Push Type Speaker Terminals
Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.
110/220 Voltage Selector
This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
.25-Inch Phone Jack
Accepts headphones with .25-inch plugs.
.25-Inch Microphone Input Jack
Accepts microphones with .25-inch plugs.
REC RCA Output
Lets you connect the amplifier to a tape deck for recording.
Take Control
Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble
Replaceable Power Fuse
The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)
Additional Features
- Harmonic Distortion: 0.3%
- 2 x 120 Watt RMS at four Ohms
- Blue LED Output Level Display
- Frequency Response: 20 Hz-20 kHz
- Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
- Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
- Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
- Dimensions: 8.27 x 2.72 x 5.39 inches
2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116(with Power Supply) – Fosi Audio TB10A
Amazon.com
- 100 WATT POWER: The Pyle Compact Bluetooth Power Amplifier gives your entertainment or PA system a boost! Provides convenient amplified speaker control w/ COM/4/8/16Ohm/25V/70V speaker outputs. Connect up to 3 mics using the rear terminals
- 6 INPUTS: The portable home amp box features 3 pairs AUX RCA audio input, 3 microphone terminals (MIC 1 features auto talkover function), monitors 600-Ohm 1V and 1W 8-Ohm terminals (music on hold), tel/paging terminals. Also features mute terminals
Compact Mini Home Power Amplifier – 100W Smart Indoor Audio Stereo Receiver w/ RCA, 3 Microphone IN, AUX, 25/70V Outputs, LED, Input Selector, For PA, Amplified Speaker Sound System – Pyle PCM60A
Amazon.com
- Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use, small size, good looks, simple functionality, and excellent sound quality
- Best for bookshelf/computer/desktop/speakers in your room, connect to your Phone/MP3 player/DC/TV/Echo Dot as input, 50W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD) can drive 2Ohm - 8Ohm speakers
- Home Hi-Fi integrated amplifier, Exclusively designed for the customers who pursue HiFi sound
PyleHome Model : PCM60A
Power Amplifier, 70 Volt Output
100 Watt Power Amplifier w/ 25 & 70 Volt Output
This 100 watt power amplifier provides the juice you need for your 25 V or 70 V PA speaker. Connect up two mics / aux inputs using the rear terminals, XLR input, and RCA jacks. Mic-1 has an auto talkover so you can easily cancel the other inputs. Each input has an independent gain control, and you can also adjust the tone of the sound using the rotary treble and bass faders. Connect your speakers using the rear terminals. This unit is also equipped with an unswitched 500W max grounded power outlet on the back. Also capable of music-on-hold. Includes a replaceable fuse and detachable AC power input. Runs on 110 or 220 V.
2 Channel Stereo Audio Class D Amplifier Mini Hi-Fi Professional Digital Amp for Home Speakers 50W x 2 – V1.0G
Amazon.com
- MULTI-ROOM MUSIC: Let music follow you from room to room. This home audio amplifier supports powering up multiple speakers in the same wired system, so you can listen or dance to the same tune in nearly every room, from just about any source or device you desire
- FOUR MULTI-ZONE SYSTEMS: Listen to music while the kids watch movies next room. This multi-zone amplifier plays music from up to 7 sources - audio input for tuner, CD player, tape deck, 2 ¼ microphones IN, USB, SD Card, and FM radio antenna
4 Multi-Zone Bluetooth Stereo Amplifier – 19” Rack Mount, Powerful 8000 Watts with Speaker Selector Volume Control & LED Audio Level Display – 4-Ch. Bridgeable Switches – PT8000CH
Amazon.com
- 2x40 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your home theater acoustic surround sound system. Gives you 2x40 watts peak power which can be used for speakers w/ 4-8 ohms impedance, enjoy high quality music and movies
- MULTIPLE SOURCES: This small personal portable digital amp box lets you connect external audio sources such as tuner, CD DVD player, tape deck, camcorder, VCR to the RCA (L/R) LINE input and enjoy enhanced amplified acoustic audio reproduction
PyleHome Model : PT8000CH
8-Ch. Stereo/Mono Amplifier
8-Channel Home Theater Amplifier [Multi-Zone Audio Source Control] Rack Mount Amp, 8000 Watt
Features:
What’s in the Box:
Technical Specs:
The Pyle 8-Channel Home Theater Amplifier is perfect for high-powered audio control. Multi-zone source control allows you to connect multiple speakers and sound systems from nearby rooms. It’s used for wide array of sound applications and connects to all of your favorite devices including TVs, stereo receivers, amplifiers, CD/DVD players, speaker systems and more. Source all of your conveniently and direct your sound with powerful, distortion-free performance. Additional system features include 4-Channel Bridge-Ability, Independent Channel Level Controls with Audio Configuration, Gold-Plated Binding Post Speaker Connectors, Protection Overload Circuitry, Visual Color LED Audio Graphic Indicators — along with Universal Rack Mount Compatibility. Enjoy multi-zone and multi-channel audio control with the Pyle 8-Channel Home Theater Amplifier System.
Home Audio Power Amplifier System – 2X40W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED – For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA – Pyle PCA2
Amazon.com
- 300 WATT POWER: The Pyramid Compact PA Speaker Amplifier gives your entertainment or PA system a boost, takes your voice to the next level! The amplifier's wide frequency response makes it suitable for amplifying music or vocal program material
- 5 INPUTS: Features 3.5mm AUX audio input jack w/ the ability to connect external devices. It has 4 microphone input (1/4'' -inch & 3-Pin XLR Jacks) w/ talkover function, headphone jack, and RCA (L/R) Aux Audio Inputs. Perfect for public announcement
300W Max Pro Audio Amplifier – 70V Multi-Channel Stage & Studio PA Speaker, Public Address Amplifier Receiver with XLR Microphone Inputs, Mic Talkover, Universal Rack Mount Design – Pyramid PA305.5
Amazon.com
- This is Nobsound's new power amplifier in 2017. Based on our previous product, we enhance its output power and improve its functionality, while still keep its mini size and elegant design. Now there is an upgraded version NS-10G Pro, if you want purer Hi-Fi experience, please search ASIN: B07GB2ZFRR to try it.
- Despite its mini size(can be hold with one hand), the output power is improved to 100W(50W*2) with the upgraded chip. You will be amazed by its output power compared to its size when you see it.
Pro audio amplifier – 70V PA speaker public address amplifier Receiver with XLR microphone inputs, mic talk over, rack mount (300 watt max)
features:
Pro audio 70 volt amplifier> stage & studio PA public address receiver system
multi-channel sound reinforcement amplifier
front panel Audio Control Center> lighted audio signal Vu meter
aux (3.5mm) input> 1/4” -Inch headphone jack
RCA (L/R) aux audio inputs> (4) microphone inputs (1/4” -Inch & 3-pin XLR jacks)
microphone priority talk-over function (mic 1 inputs> speaker outputs: com/ 4 Ohm/ 8 ohm/ 16 ohm/ 70v
Master Audio output Level adjustment> independent Channel volume controls> feedback filter adjustment
EQ/ bypass, phono switch> clipping & protection LED indicator lights> heavy duty aluminum heatsink
power on/ off switch> universal rack mount designed> used with audio mixers, PA speaker systems, sound processors
technical specs:
power output: 300 Watt max (100 Watt @ 8 ohm)
frequency response: 75 – 20Khz, XLR mic
T.H.D.: >0.5% S/N ratio: 60dB, phono
input sensitivity: 150mV (aux inputs> notch filter: -12db
fuse: 3a, 250v
power supply: 120/240V, voltage selector> Dimensions (L x w x H): 19.0” X 11.9” X 4.9” -Inches> Sold as: unit
weight: 22.36 lbs.
