Best Home Audio Power Amplifier
Nowadays, there are so many products of home audio power amplifier in the market and you are wondering to choose a best one.You have searched for home audio power amplifier in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home audio power amplifier which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Home Audio Power Amplifier System – 2X40W Mini Portable Dual Channel Surround Sound Stereo Receiver Box w/ LED – For Amplified Subwoofer Speakers, CD DVD Player, Theater via 3.5mm RCA – Pyle PCA2
- Perfectly suited for your desktop or a smaller space in your home or office, digital amplifier is easy to connect to your audio system with no software to install or settings to change
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers
- Simple compact design but practical and powerful
- No pop, no audible noise, dead silent when nothing is playing through it
2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116(with Power Supply) – Fosi Audio TB10A
Yamaha A-S301BL Natural Sound Integrated Stereo Amplifier (Black)
- POWER YOUR SOUND SYSTEM: 2 Channels rated at 50 watts into 8 ohms. 60 watts RMS per channel at 4 ohms. Bridge Output: 150 Watts at 8 ohms.
- HIGHLIGHTS: 5-Way Binding Posts. A/B Speaker selector. Auto Signal Sensing Power On. Dual Auto-Switching Inputs. Independent level and balance controls. Rear mounted treble and bass controls. Front panel diagnostic LEDS.
- AUTOMATICALLY KNOWS WHEN TO TURN ON: This amplifier is audio sensing, meaning it automatically turns on when you start your system.
AudioSource Analog Amplifier, Stereo Power A Amplifier AMP100VS for Home Sound Systems
- 2X120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your PA & home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4-8 ohms impedance, enjoy high quality music & movies
- MULTIPLE INPUTS: This personal portable digital amp box supports various external sources - 3 3.5mm AUX for tuner, CD DVD, MP3, computer, iPad, iPhone & cell phone, 1/4" mic in & 1/4" headphone jack input. Also features a REC RCA output for recording
Experience the vibrancy of our home sound system. A great sound system relies on a great amplifier–they’re an integral element to a full soundscape. Create a multi-room audio environment, build a home theater, or expand your system to the outdoors. Our gold standard Class A amplifiers will fit your every need. This Power (A) AMP100VS system has 2 channels rated at a power output of 50 watts into 8 ohms. It has a power output of 60 watts RMS per channel into 4 ohms. 150 watts are bridged to an output at 8 omhs. Born out of Portland, Oregon, AudioSource began designing and manufacturing high-grade, affordable, and great sounding audio products in 1978. Our goal is to exceed your expectations for value and performance. Specifications: Input Sensitivity: Variable, .7 Vrms for rated power at 8 ohms. Frequence response: 10Hz to 30kHz. Channel Crosstalk: 70 dB. Less than 0.2% THD into 8 ohms at rated power. S/N Ratio: 100 dB A-weighted.
Pyle 2X120 Watt Home Audio Power Amplifier – Portable 2 Channel Surround Sound Stereo Receiver w/ USB in – for Amplified Subwoofer Speaker, CD DVD, MP3, iPhone, Phone, Theater, PA System – PTAU45
- 2x120 WATT POWER: The Pyle Dual Channel Audio Amplifier gives your entertainment system a boost! Offers low distortion w/ acoustically accurate audio reproduction. Supports speakers w/ 4 ohm impedance allowing you to enjoy high quality audio
- 4 INPUTS: The professional amp supports various external devices such as USB, SD, headphone jack. Connect smart phone, iPhone, computer, MP3, CD player to 3.5mm AUX or RCA input for surround acoustic amplified sound w/ the speaker
Product Description
The Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power. This simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality, this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for the listener. Durable and affordable, this amp is made to last.
Features:
From the Manufacturer
Click here for a larger image
Click here for a larger image
Click here for a larger image
Click here for a larger image
The Ultimate Stereo Power Amplifier
This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home –the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs.
Switchable Mixing (Karaoke) Mode
When set to ‘mixing’ the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included)
Switchable MIC Pager Mode
When set to ‘pager’ the signal from AUX1, AUX2, & CD will be attenuated by -12dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system.
USB 2.0 Input Interface with LED Indicator
You’ll be in control with playback options when you insert a USB flash drive –or similar USB device. Play your favorite audio files from your computer’s media library when you connect it directly into the amplifier.
.14-Inch AUX-In Jack
The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players etc.
Push Type Speaker Terminals
Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode.
110/220 Voltage Selector
This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
.25-Inch Phone Jack
Accepts headphones with .25-inch plugs.
.25-Inch Microphone Input Jack
Accepts microphones with .25-inch plugs.
REC RCA Output
Lets you connect the amplifier to a tape deck for recording.
Take Control
Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble
Replaceable Power Fuse
The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included)
Additional Features
- Harmonic Distortion: 0.3%
- 2 x 120 Watt RMS at four Ohms
- Blue LED Output Level Display
- Frequency Response: 20 Hz-20 kHz
- Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches)
- Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz
- Tone Controls: Bass & Treble: +/-10 dB (100 Hz/10 kHz)
- Dimensions: 8.27 x 2.72 x 5.39 inches
Home Audio Power Amplifier System – 2x120W Dual Channel Theater Power Stereo Receiver Box, Surround Sound w/ USB, RCA, AUX, LED, Remote, 12V Adapter – For Speaker, iPhone – Pyle PCAU46A
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Electronically balanced RCA & XLR inputs
- binding post and Speak on outputs
- Efficient forced-air cooling prevents excessive thermal buildup
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Crown XLi800 Two-channel, 300W at 4Ω Power Amplifier
- 1000-WATT POWER: The Pyle 4 Channel Amplifier is perfect for your PA &
- home theater surround sound system. It gives you 1000 watts peak power which can be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high quality music &
- movies
- 4 AUDIO INPUTS: This personal portable digital amp box supports 4 external sources - tape, tuner, AUX &
- DVD CD, w/ 2 ¼" microphone inputs for karaoke &
The XLI Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.
The four models in the series are the XLi800, XLi1500, XLi2500 and XLi3500. They are identical except for output power.
Pyle 1000 Watt Premium Home Audio Power Amplifier – Home Theater 4 Channel Stereo Receiver w/ Speaker Selector & Remote – for Amplified TV, Subwoofer Speakers, PA System – PT1100
- Adopt Texas Instruments TDA7498E chip to get clear audio sound, No pop, no audible noise, dead silent when nothing is playing through it.
- 160W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), for outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers, can use iPod, Phone, MP3 players, TV, Echo Dot, CD players, or Streaming Media players as input.
- 2.0CH audio integrated amplifier, aluminum enclosed, small size, good looks, simple functionality, and excellent sound quality
TDA7498E 2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp for Home Speakers 160W x 2 + 24V Power Supply
- 160w Max
- 2 Stereo Line Inputs & 1 Stereo Line Output
- Volume & Balance Controls
- This model Operates as Zone A or Zone B not both..
- Replaceable Fuse: T4AL (110/120V), T2AL (220/240V)
- Power On/Off Switch & LED Indicator - Auto Input Switching - Bridgeable Output - Dimensions: 16.5''W x 2.36''H x 8.2''D
Pyle Home PAMP1000 160 Watt 2 Channel Home Stereo Power Amplifier
- 2X120 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic surround sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
- 4 INPUTS: This personal digital amp box supports various external sources - 3 pairs RCA audio input for tuner, CD player, tape deck, camcorder or VCR, 1/4" microphone IN, 1/4" headphone jack input. Also features a REC output for recording
2 Channel Home Stereo Power Amplifier
Home Audio Power Amplifier System – 2X120W Mini Dual Channel Mixer Surround Sound Stereo Receiver Box w/ RCA, AUX, Mic Input – For Amplified Speakers, PA, CD Player, Theater – Pyle PTA4
- MULTI-ROOM MUSIC: Let music follow you from room to room. This home audio amplifier supports powering up multiple speakers in the same wired system, so you can listen or dance to the same tune in nearly every room, from just about any source or device you desire
- FOUR MULTI-ZONE SYSTEMS: Listen to music while the kids watch movies next room. This multi-zone amplifier plays music from up to 7 sources - audio input for tuner, CD player, tape deck, 2 ¼ microphones IN, USB, SD Card, and FM radio antenna
4 Multi-Zone Bluetooth Stereo Amplifier – 19” Rack Mount, Powerful 8000 Watts with Speaker Selector Volume Control & LED Audio Level Display – 4-Ch. Bridgeable Switches – PT8000CH
PyleHome Model : PT8000CH
8-Ch. Stereo/Mono Amplifier
8-Channel Home Theater Amplifier [Multi-Zone Audio Source Control] Rack Mount Amp, 8000 Watt
Features:
What’s in the Box:
Technical Specs:
The Pyle 8-Channel Home Theater Amplifier is perfect for high-powered audio control. Multi-zone source control allows you to connect multiple speakers and sound systems from nearby rooms. It’s used for wide array of sound applications and connects to all of your favorite devices including TVs, stereo receivers, amplifiers, CD/DVD players, speaker systems and more. Source all of your conveniently and direct your sound with powerful, distortion-free performance. Additional system features include 4-Channel Bridge-Ability, Independent Channel Level Controls with Audio Configuration, Gold-Plated Binding Post Speaker Connectors, Protection Overload Circuitry, Visual Color LED Audio Graphic Indicators — along with Universal Rack Mount Compatibility. Enjoy multi-zone and multi-channel audio control with the Pyle 8-Channel Home Theater Amplifier System.