Best Home Audio Subwooker Amplifier
Nowadays, there are so many products of home audio subwooker amplifier in the market and you are wondering to choose a best one.You have searched for home audio subwooker amplifier in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home audio subwooker amplifier which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Subwoofer Amplifier 300 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass Switchable Amplifier One Channel Home Theater Single Power Subwoofer Amp Fosi Audio M03
- 【Hi-Fi Amp with Clean Sound Quality】M03 subwoofer amp adopt with the Instruments TPA3255D2 chip, can provide 300watt output power for 4-8ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Fosi Audio Subwoofer Amplifier Mono Channel Amp Home Theater Power Amplifier 100W M02
- ❤ 【Hi-Fi Amp with Clean Sound Quality】M02 subwoofer amp adopt with the Instruments TPA3116 chip,NE5532 op-amp, can provide 100watt output power for 4 ohm subwoofer or speaker. No pop, no audible noise, dead silent when nothing is playing through it.
- ❤ 【Full-Frequency and Sub Bass Switchable 】With a selector can be switched to subwoofer bass amplifier or full frequency mono amp, can be connected to passive suboower, passive speaker or active subwoofer.
Nobsound G2 Subwoofer Amplifier & Mono Power Amp, PBTL/BTL Bridge, 100W Mini Sub Amp for Home Theater
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers
- ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
- To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
- Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB
- Output Impedance: 4-8 ohm
- Sub volume and crossover control knobs
- LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.
Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!
Polk Audio PSW10 10"Powered Subwoofer – Featuring High Current Amp and Low-Pass Filter | Up to 100 Watts | Big Bass at a Great Value | Easy integration Home Theater Systems
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH - A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME - Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion. PSW Series subwoofers blend perfectly with systems composed of other Polk loudspeakers, especially TSi, RM and R/T/M Series speakers
PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.
Subwoofer Amplifier Receiver 100Watt Mini Hi-Fi Digital Class D Integrated Stereo Audio Amp for Sub Bass + Power Supply TP-01
- Come with 19V power adapter that can be carefully matched with this home mono integrated amp physically as well as electrically
- Adopt Texas Instruments TPA3116 chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Built-in low pass filter,100W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
1. Please plug the power cord into the amp THEN the wall, plug the audio cables into amp THEN switch on.
Some customers may see some slight sparks flying when they plug the power supply into the amplifier, because they use it in wrong way, you need to connect the amp to the power supply first, then plug the power supply into the 110v AC outlet, don’t worry about the sparks, because this is class d amplifier, the capacitors need to charge when the power in, it’s normal and safe.
1. Power supply range: 12v-24v;
2. THD: ≤ 0.04%;
3. Frequency Range: 20Hz – 120Hz (±1 dB);
4. SNR: ≥ 98dB;
5. Input sensitivity: ≤ 280mV;
6. Terminating impedance: 2Ohm – 8Ohm;
7. Output power: 100W for Subwoofer;
8. Input mode: 3.5mm audio input;
9. Power supply: 19V 4.74A 90W;
10. Supplied Accessories: Amplifier, Power supply, AC power cord, Manual.
TB20A TPA3116D2 Stereo Amplifier 2.1 Channel Class D Audio Amp with Subwoofer Volume Control 2x50W 1x100W Sub Output Super Bass Power Receiver, Treble Bass Independent Adjustment + Power Supply
- Come with the 24V power adapter that can be carefully matched with this integrated amp physically as well as electrically. Unlike other amps come with a 12V power supply, The power supply is very important for a digital amp if you need clear sound !
- With subwoofer volume control, L and R channels Treble&Bass independent control, subwoofer frequency adjustment control.
- Adopt Texas Instruments TPA3116D2 * 2 chips, small simple compact design but practical and powerful, can drive 2-8ohm, 20-200Watts speakers
Subwoofer Amplifier TDA7498E Mini Sub Bass Amp Digital Class D Integrated Subwoofer Amplifier 220Watt x 1 Fosi Audio TP-02
- Built-in low pass filter, 220W X 1(4 ohms, 20 Hz - 120Hz, 0.04% THD, 18db/octacce) for subwoofer, Small simple compact design but practical and powerful
- Advanced circuitry design, built-in speakers protection circuit, solid aluminum chassis for long time use
- Adopt Texas Instruments TDA7498E chip, NE5532 op-amp. No pop, no audible noise, dead silent when nothing is playing through it
- Home Hi-Fi mono integrated class d amplifier, Exclusively designed for the customers who pursue HiFi sound
5.2-Channel Hi-Fi Bluetooth Stereo Amplifier – 1000 Watt AV Home Speaker Subwoofer Sound Receiver W/Radio, USB, RCA, HDMI, Mic in, Wireless Streaming, Supports 4K UHD TV, 3D, Blu-Ray – Pyle PT694BT
- 5. 2 Channel: the Pyle 5. 2 Channel hi-fi home theater receiver is perfect for your home entertainment system. Gives you 1000 watts peak power to be used for speakers and subwoofers W/ 4-16 ohms impedance, lets you enjoy high quality amplified audio
- Bluetooth-compatible: the professional integrated high powered stereo receiver is equipped w/ Bluetooth wireless music streaming. Works with today’s latest devices including smart phones, iPhone, iPad and computers with hassle-free receiver pairing
Nobsound 100W Subwoofer Digital Power Amplifier Audio Mini Amp (Subwoofer, Black)
- This subwoofer amplifier adopts brand-new TI TPA3116D2 amplifer chip, which can offer 100W powerful output and 90% efficiency.
- Compared with other similar products on the market, it also uses a NE5532 buffer op-amp to achieve more powerful performance.
- Its super mini size can be easily hold by one hand, which will be a good match for your desktop.
- Power supply (not included, search ASIN: B074J81XRB to get one): DC 8-25V; at least 3A; higher voltage and current within the limitation would bring higher power
- Audio input: 3.5mm
- Audio output: Banana plug
- Power supply: DC 8-25V; at least 3A
- Maximum power: 100W
- Chip: TPA3116D2 + NE5532
- Weight: 0.35Kg; 0.2Kg (without package)
- Dimensions: 68.5 * 33 * 90 mm (not including terminals)
- 1 * amplifier
OSD Audio 300W in-Wall Trimless Home Theater Subwoofer – 8” Woofer – SL800D…
- POWER: The SL800D has an 8 inch polypropylene woofer and a 10 inch passive radiator to produce the richest low frequency response while reducing distortion and vibration, so pair with a robust amplifier.
- SOUND QUALITY: Place the SL800D into the wall to fill in the low notes missing from your music and movies. It enhances the sound quality of your home theater for ultimate guest appeal.
- BASS: With 300 Watts of power handling, a deep bass sound is produced in a compact package and smaller enclosure for a controlled vibration system. The passive radiator increases the low frequency response.
Our SL800D is a passive in-wall subwoofer with an 8” polypropylene woofer and a 10” passive radiator to give you the richest low frequency response (bass) in the most compact package. This slim in-wall sub fills in the low notes missing from your movies and music and enhances overall sound quality without taking up any of your floor space. The SL800D includes the active 8” polypropylene woofer that produce clear, full bass tones while a 10” passive radiator enhances frequency response and gives you the most distortion-free sound. The SL800D is capable of handling up to 300 Watts of power so it can be paired with a robust amplifier. The perfect DIY weekend project, this in-wall sub has a paintable frame and grille to blend into any room.
500W Karaoke Wireless Bluetooth Amplifier – 4 Channel Stereo Audio Home Theater Speaker Sound Power Receiver w/ AUX IN, FM, RCA Subwoofer Speakers OUT, USB, Microphone IN w/ Echo – Pyle PTA44BT
- 500 WATT POWER: The Pyle 4 Channel Bluetooth Home Audio Amplifier is perfect for your PA and home theater entertainment. It gives you 500W peak power which can be used for multi speakers w/ 4-8 ohms impedance allowing you to enjoy high-quality audio
- BLUETOOTH-COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing
Pyle Model : PTA44BT
Bluetooth Home Audio Source Amplifier
Bluetooth Home Audio Amplifier, 4-Ch. Audio Source Stereo Receiver System with FM Radio, MP3/USB/SD/AUX Playback (500 Watt)
What’s in the Box:
Best home audio subwooker amplifier: Top-Rated Brands & What to Buy