Top 10 How Much Is A Co2 Tank For A Kegerator

If you want to set up a draft dispensing system, you need a dependable CO2 tank to provide the appropriate amount of pressure for your lines. This CO2 cylinder is produced from high strength aluminum alloy that is lighter than steel and doesn’t rust. Remember, the tank must be used in a fully upright position, so do not tilt it or lay it on its side. It’s easy to fill; just check out your local listings under “Gas,” or try local fire extinguisher supply or welding supply companies. *Please note: Due to Federal regulations, we cannot ship this tank filled. In other words, when you receive this tank it will be EMPTY.*. In stock and ready to ship. Features: Made of high quality aluminum with a brushed body and unpainted dome. Stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings. . Specs: Dimensions: 5 1/4″D x 18″H. Tare Weight: 7.7 lb. Holds 5 lb of gas. Capacity: 6 – 8 half kegs. Service Pressure: 1800 PSI / 124 BAR. Test Pressure: 3000 PSI / 207 BAR. CGA 320 valve. Shipping: Tanks shipped EMPTY. We can not ship these, or any other tank filled.

This direct draw kit includes everything you need to pressurize and tap a D system keg. It’s the perfect addition to a commercial kegerator that does not include the dispense components, and can be paired with a jumper line to connect to and serve from a jockey box. It includes a brand new 5 lb. aluminum CO2 tank with a glossy red, corrosion-resistant epoxy finish (empty), commercial grade double gauge regulator, US lever handle D system keg coupler, 5′ air line assembly (5 feet of 5/16″ blue air tubing and two plastic air line clamps), and neoprene washer.

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

Aluminum Carbon Dioxide Cylinder with CGA 320 valve installed. Brushed aluminum body with plain dome (colors available), 5 LB capacity, 1800 PSI, DOT-3AL & TC-3ALM designed, high strength aluminum alloy 6061-T6, 5.25 inch diameter, 14.2 inch length, 1.125″ UNF inlet thread.
All cylinders are manufactured in accordance with the U.S. Department of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.

Perfect for simultaneously dispensing two kegs of beer at the same pressure, this Kegco HL-62-2 Dual Gauge Two Product CO2 Regulator features a commercial-grade construction that has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants. This double gauge regulator has a gauge on top that measures CO2 pressure in the kegs as well as a gauge on the side that indicates how much CO2 is left in the tank, so you’ll never again be caught off guard by an empty CO2 cylinder. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall, and a large pressure adjustment knob allows you to make quick and precise adjustments by hand. For added safety, this draft beer regulator features an internal safety pressure relief valve that releases when the delivered pressure exceeds the set pressure by 15 PSIG, a manual pressure release knob that has been built into the regulator body, and two shut-off valves that make it easy to instantly shut off pressure to the kegs without backing up your beer lines. These shut-off valves have a check valve that prevents backflow into the regulator.

Kegco’s new HL-62 Commercial Grade Dual Gauge CO2 Regulator has been specially designed to deliver maximum convenience and durability in hectic commercial environments like bars, tasting rooms, and restaurants. This double gauge draft beer regulator has a gauge on top that measures CO2 pressure in the keg as well as a gauge on the side that indicates how much CO2 is left in the gas tank, so you’ll never again be caught off guard by an empty CO2 cylinder. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall, and a large pressure adjustment knob allows you to make quick and precise adjustments by hand. For added safety, this regulator also features an internal safety pressure relief valve that releases when the delivery pressure exceeds set pressure by 15 PSIG, a manual pressure release valve built into the regulator body, and a shut-off valve that makes it easy to quickly shut off pressure to the keg without backing up your beer line. This shut-off valve has a check valve that prevents backflow into the regulator.

The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.

Kegco’s YH-76S-3 Commercial Grade Triple Gauge Secondary Regulator consistently delivers peak performance and is capable of handling the harsh conditions in commercial environments like bars and restaurants. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank at different pressures. This secondary regulator has its own shut off valves and pressure adjustment knobs and can be mounted to a wall or the inside of a refrigerator. In order to use this secondary regulator, you will still need a primary regulator onto which one output will connect to the secondary with a piece of air line. Kegco regulators have a sturdy construction that ensures consistent flow pour after pour. This regulator features three T-style adjustment valves that make it easy to adjust the keg pressure when the regulator is cold, three individual gauges on the regulator that indicate how much CO2 pressure is inside of the kegs, and three pressure release valves conveniently located on the regulator body.

Secondary regulators are best mounted to a wall or the inside of the refrigerator.
The Secondary Regulator is built with high end features. Secondary regulators are used when you
are attempting to dispense two or more kegs off of the same Co2 tank at different
pressures. A secondary regulator will allow you to lower the pressure to the second keg. You still need
a primary regulator on which one output would connect to the secondary with a piece of air
line. The secondary regulator has its own shut off valve and pressure adjustment knob.

Kegco new hl-62n commercial grade dual gauge nitrogen regulator has been specially designed to deliver maximum convenience and durability while dispensing delicious Stout beer, coffee, and wine in busy commercial environments like bars, coffee shops, tasting rooms, and restaurants. This double gauge draft beer regulator has a Gauge on top that measures pressure in the keg as well as a gauge on the side that indicates how much nitrogen gas is left in the tank, so you’ll never again be caught off guard by an empty cylinder. Both gauges come equipped with rubber boots that help protect them from damage in the event of a fall, and a large pressure adjustment knob allows you to make quick and precise adjustments by hand. For added safety, This regulator also features an internal safety pressure relief valve that releases when the delivery pressure exceeds set pressure by 15 PSIG, a manual pressure release valve built into the regulator body, and a shut-off valve that makes it easy to quickly shut off pressure to the keg without backing up your beer line. This shut-off valve has a check Valve that prevents backflow into the regulator.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy How Much Is A Co2 Tank For A Kegerator, eg:

• What are Top 10 How Much Is A Co2 Tank For A Kegerator for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 How Much Is A Co2 Tank For A Kegerator to buy?
• What are Top Rated How Much Is A Co2 Tank For A Kegerator to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) How Much Is A Co2 Tank For A Kegerator?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for How Much Is A Co2 Tank For A Kegerator.
• Before deciding to buy any How Much Is A Co2 Tank For A Kegerator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose How Much Is A Co2 Tank For A Kegerator and What you should consider when buying the How Much Is A Co2 Tank For A Kegerator and Where to Buy or Purchase the How Much Is A Co2 Tank For A Kegerator. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 How Much Is A Co2 Tank For A Kegerator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about How Much Is A Co2 Tank For A Kegerator.